Sold
I have decided to sell one of my two playing cues, two break cues, and two cases. So for your consideration here is my Mezz Power Break Pro (Wrapless) with 2 Deep Impact Pro H
(Massanranduba Core) Shafts, Samsara 9-Layer Leather Jump/Break Tips, and Mezz Exotic wood joint protectors.
Both of the shafts are brand new, never been test hit or even chalked. They are both approximately 13 mm at the tips and one weighs approximately 5.61oz while the other weighs
approximately 5.68 oz. I bought these shafts as spares for my two break cues. I having been breaking with the Pro R (Ash core) shafts and decided to keep those because the weight
better matches my playing cue. The Samsara tips were installed by Bob Dzuricky of Dzuricky Custom Cues. If you're not familiar with his work I highly recommend checking out his website
www.dzcues.com The site has pictures of some of his finished cues (including mine :smile: ) plus lots of information, pictures, and videos on how he makes his cues.
The butt is in excellent condition but it is used. It weighs approximately 15.31 oz but this can be adjusted if you change the weight bolt. I have broken somewhere between 25 and 100 racks
with this butt using one of my Pro R shafts. There is one small scratch/ding in the finish that I can see but not feel about 1/8" long located about 9" down from the joint. Also, I can feel the outside
edges of the decorative silver rings in the center of the butt, you would never notice it while breaking but I thought I should point it out. I think they may be a decal and that's why they can be felt
below the finish but I don't really know.
Everything rolls straight together and apart.
The joint protectors are Mezz's Exotic wood joint protectors in Ebony. The ones for the butt and one of the shafts are mostly brown with some black streaks and the one for the other shaft is
mostly black with some brown streaks. If you're interested in these Mezz makes them in a number of different woods which you can see at www.mezzcue.com/en and if you want to
order some the people at www.mezzusa.com are very helpful. However they are pricey - the last set I bought cost $59.95 and that's for one butt and one shaft, if you have 2 shafts you
have to buy 2 complete sets of joint protectors.
Asking price is Sold. PayPal fees, USPS shipping (to the lower 48 only), and full insurance are included in the price. I have no interest in trades, sorry.
Please PM me if you're interested, have any questions, or want more pictures.
One last note - in the photos below I rotated the butt and shafts approximately 1/4 turn between each picture to try and give you a complete view of the cues condition.
I have decided to sell one of my two playing cues, two break cues, and two cases. So for your consideration here is my Mezz Power Break Pro (Wrapless) with 2 Deep Impact Pro H
(Massanranduba Core) Shafts, Samsara 9-Layer Leather Jump/Break Tips, and Mezz Exotic wood joint protectors.
Both of the shafts are brand new, never been test hit or even chalked. They are both approximately 13 mm at the tips and one weighs approximately 5.61oz while the other weighs
approximately 5.68 oz. I bought these shafts as spares for my two break cues. I having been breaking with the Pro R (Ash core) shafts and decided to keep those because the weight
better matches my playing cue. The Samsara tips were installed by Bob Dzuricky of Dzuricky Custom Cues. If you're not familiar with his work I highly recommend checking out his website
www.dzcues.com The site has pictures of some of his finished cues (including mine :smile: ) plus lots of information, pictures, and videos on how he makes his cues.
The butt is in excellent condition but it is used. It weighs approximately 15.31 oz but this can be adjusted if you change the weight bolt. I have broken somewhere between 25 and 100 racks
with this butt using one of my Pro R shafts. There is one small scratch/ding in the finish that I can see but not feel about 1/8" long located about 9" down from the joint. Also, I can feel the outside
edges of the decorative silver rings in the center of the butt, you would never notice it while breaking but I thought I should point it out. I think they may be a decal and that's why they can be felt
below the finish but I don't really know.
Everything rolls straight together and apart.
The joint protectors are Mezz's Exotic wood joint protectors in Ebony. The ones for the butt and one of the shafts are mostly brown with some black streaks and the one for the other shaft is
mostly black with some brown streaks. If you're interested in these Mezz makes them in a number of different woods which you can see at www.mezzcue.com/en and if you want to
order some the people at www.mezzusa.com are very helpful. However they are pricey - the last set I bought cost $59.95 and that's for one butt and one shaft, if you have 2 shafts you
have to buy 2 complete sets of joint protectors.
Asking price is Sold. PayPal fees, USPS shipping (to the lower 48 only), and full insurance are included in the price. I have no interest in trades, sorry.
Please PM me if you're interested, have any questions, or want more pictures.
One last note - in the photos below I rotated the butt and shafts approximately 1/4 turn between each picture to try and give you a complete view of the cues condition.
Attachments
Last edited: