miss threaded cuetec fiberglass insert repair ideas

[james73]

I have an old cuetec fiberglass sst cue with a misthreaded shaft joint. It looks like a poly compound insert. I will bet you fellows have a bunch of these. Any thoughts on repair would be appreciated.

 

[Kim Bye]

Bore out, install a phenolic or Hydex 202 plug and tap it, easy peasy.

 

[Sheldon]

Get it to any competent cue maker, and they will fix you right up. There's not really an insert to replace, but with the right lathe it's a pretty quick and easy job to replace the threads.

 

[james73]

Thank you for the timely and helpful responses.

 

[j2pac]

I have an old cuetec fiberglass sst cue with a misthreaded shaft joint. It looks like a poly compound insert. I will bet you fellows have a bunch of these. Any thoughts on repair would be appreciated.

If it is the shaft, I might have one lying around. Let me see if I can find it. If it is straight, I will send it to you.

 

[james73]

If it is the shaft, I might have one lying around. Let me see if I can find it. If it is straight, I will send it to you.

well that would be great. It is my son's first cue of his own and my cue repairman has quit. KCMO area

 

[j2pac]

well that would be great. It is my son's first cue of his own and my cue repairman has quit. KCMO area

I have one, but it has a wobble. Let me know if you still want it.
If you wouldn't mind, post a picture of the cue.
Thank you.
j2

 

[Michael Webb]

One of these solves your problem.

 

[j2pac]

One of these solves your problem.