Mottey Shaft

G

George55

Registered
I am selling a Paul Mottey shaft. It is straight, 3/8 X 10, 12.5 mm, with an ivory ferrule. Just refinished by Paul. It has plain black ring work. $120 plus shipping from Illinois.
George:)
 
Mottey shaft

The diameter of the shaft at the tip is 12.50 mm and the joint screw is
3/8 x 10. Hope this helps and thank you for your interest.
George:)
 
Hi George

thanks for your prompt reply and sorry if i didnt specify clearly. i was asking about the diameter of the joint of the mottey shaft in question.. this is important if i want to match the shaft to another cue butt nicely.

Bgrds
Raist
 
Mottey shaft

Raist,
What type of cue are you going to use for this shaft? Knowing this information will certainly help determine if the shaft will line up properly for you. For instance, if your cue is a McDermott I would locate a McDermott cue and see how it fits. Today I will find a micrometer to measure the width at the joint. If there is anyone out there who knows the width of a Paul Mottey 3/8 x 10 at the joint, please advise. Thanks to you Raist and thank you to anyone who is able to assist.
Respectfully,
George:)
 
Go to a hardware store and get some digital calipers you can probably pick one up for $20. Mottey will most likely be .8 something! could be anywere from .800 to .860 probably in the 40-60 range.
 
Mottey shaft

Flushman,
Thank you for the information. I was told Mottey cues are .840 at the joint. Hope this helps Raist and anyone else interested in the purchase of this shaft.
Take care,
George:)
 
Mottey shaft

Please accept my edit as best offer of at least $100 plus shipping from Illinois. Send me a PM.
Thanks again,
George:)
 
You must log in or register to reply here.
Back
Top