Predator BK2 upgrade...
- Thread starter LoReNz
- Start date
Im sure you can but you will also have to have the insert of the shaft removed and re-bored to fit a radial pin since the BK2 shaft only comes as uniloc, which will cost more. Kind of a pointless change IMO, i doubt it will change the performance of the cue at all.
Contact KJcues, he posts here and does a lot of work on predators.
Contact KJcues, he posts here and does a lot of work on predators.
Let's first ask the question; why?
This particular swap isn't called for very often.
It can be done but no heat can be used, which would be the quick/easy/cheap method. Both pin & insert should be removed by boring with carbide tooling. The handle won't need to be plugged, just drilled/tapped for the Radial as the Radial pin is of larger diameter than the Uni-Loc. The shaft will need to be plugged then drilled/tapped for the Radial thrd. Please PM if interested in having me do the work. KJ
This particular swap isn't called for very often.
It can be done but no heat can be used, which would be the quick/easy/cheap method. Both pin & insert should be removed by boring with carbide tooling. The handle won't need to be plugged, just drilled/tapped for the Radial as the Radial pin is of larger diameter than the Uni-Loc. The shaft will need to be plugged then drilled/tapped for the Radial thrd. Please PM if interested in having me do the work. KJ