Price below is firm. Any offers asked below this amount will be ignored. Thanks.
Steve Lomax Jump 3 Piece Cue Black W/white Logo - Broken/repaired But Functional
I'm listing this jump cue AS-IS - NO RETURNS, since in an effort to make the cue lighter by replacing the main joint pin, with an aluminum pin, when it was being set there was too much glue in the joint cavity where it cracked along the side of the collar. To "repair" the issue, electrical tape was wrapped below and over top the crack. This was done when the joint was setting in the glue and has never been removed or replaced. The replacement of the joint was done over two years ago and the cue has had moderate use in matches as my main jumper. I purchased a jump break cue and no longer need a dedicated jump cue anymore.
For functionality, it works as designed. There is no issue with the lower joint other than a notable scrape on the collar. There are a few dings and scrapes here and there. The small butt section is 2.2oz, while the upper section is 4.4oz. Together they are just over 18.5" long.
The shaft is in good shape. It's 4.4oz in weight and the tip diameter is 12.97mm. Standard 29" long. It has a lift when rolled on a pool table; tip does not come off table. Based on the picture, you can see where the lift is, I marked it with a post-it note, but for a jump shaft this shouldn't be a big detractor. Overall, the jump cue is 11oz. It comes with off-market joint protectors.
If you are looking to get a replacement jump shaft for your Steve Lomax jump cue or it doesn't bother you that it's been "repaired" with electrical tape, then this could be a good deal.
I'm asking for $100. I will provide free shipping in the lower 48 states via USPS Priority.
For more pics, view the gallery here: https://photos.app.goo.gl/PAUiWUVtGyFiZw3UA
Price is firm. Payment via PayPal as gift. Thanks!
Steve Lomax Jump 3 Piece Cue Black W/white Logo - Broken/repaired But Functional
I'm listing this jump cue AS-IS - NO RETURNS, since in an effort to make the cue lighter by replacing the main joint pin, with an aluminum pin, when it was being set there was too much glue in the joint cavity where it cracked along the side of the collar. To "repair" the issue, electrical tape was wrapped below and over top the crack. This was done when the joint was setting in the glue and has never been removed or replaced. The replacement of the joint was done over two years ago and the cue has had moderate use in matches as my main jumper. I purchased a jump break cue and no longer need a dedicated jump cue anymore.
For functionality, it works as designed. There is no issue with the lower joint other than a notable scrape on the collar. There are a few dings and scrapes here and there. The small butt section is 2.2oz, while the upper section is 4.4oz. Together they are just over 18.5" long.
The shaft is in good shape. It's 4.4oz in weight and the tip diameter is 12.97mm. Standard 29" long. It has a lift when rolled on a pool table; tip does not come off table. Based on the picture, you can see where the lift is, I marked it with a post-it note, but for a jump shaft this shouldn't be a big detractor. Overall, the jump cue is 11oz. It comes with off-market joint protectors.
If you are looking to get a replacement jump shaft for your Steve Lomax jump cue or it doesn't bother you that it's been "repaired" with electrical tape, then this could be a good deal.
I'm asking for $100. I will provide free shipping in the lower 48 states via USPS Priority.
For more pics, view the gallery here: https://photos.app.goo.gl/PAUiWUVtGyFiZw3UA
Price is firm. Payment via PayPal as gift. Thanks!
Last edited: