Here are some various supplies left over from my cue shop. If you see something you like, lets talk and see if we can make a deal. Some details:
- The white collets are made from Delrin. I used them to glue the phenolic joint rings on the cue as the glue wouldn't stick to the Delrin. Also in the group is larger collets used to chuck up the butt for inserting pins, etc.
- Lots of cutting tools for the Hightower lathe I had. The ones with the green coating have been re-sharpened. Also bits for the router, and the arrow shaped ones were for cutting "V" cut points.
- The brass Thread cutter was for installing stainless joints - can't remember the thread count.
- The Ferrell material is ivory. The longer one is 2-3/8" long and .570 thick. The smaller one was taken off a shaft and is about 1" but only .490 thick.
- The dial indicator was fairly expensive. You can see the numbers on the accompanied box to look it up.
- The Joe Porper protective caps are for a 5/16-14 joint. There are 6 sets.
Feel free to email me direct at coxbr@bluffton.edu. Thanks.
NOTE: Payment by pay-pal preferred.
- The white collets are made from Delrin. I used them to glue the phenolic joint rings on the cue as the glue wouldn't stick to the Delrin. Also in the group is larger collets used to chuck up the butt for inserting pins, etc.
- Lots of cutting tools for the Hightower lathe I had. The ones with the green coating have been re-sharpened. Also bits for the router, and the arrow shaped ones were for cutting "V" cut points.
- The brass Thread cutter was for installing stainless joints - can't remember the thread count.
- The Ferrell material is ivory. The longer one is 2-3/8" long and .570 thick. The smaller one was taken off a shaft and is about 1" but only .490 thick.
- The dial indicator was fairly expensive. You can see the numbers on the accompanied box to look it up.
- The Joe Porper protective caps are for a 5/16-14 joint. There are 6 sets.
Feel free to email me direct at coxbr@bluffton.edu. Thanks.
NOTE: Payment by pay-pal preferred.
Attachments
Last edited:
