WTB 3/8-11 314s

titlistsucker said:
Anyone know where i can buy 3/8-11 314 shafts?

Bgrds
Raist
Click to expand...

Hello Raist...

I do not believe any of the normal wholesalers are stocking 3/8-11. The wholesalers do stock the 314 blanks and then the cuemaker buys the blanks and threads them with whatever thread he or she wants.
 
i tried for one here myself a few weeks ago and turned up nothing... a cuemaker can make you one and even match your rings close but you would have to send them the cue to do it right...
i saw one on ebay ONCE, emailed the guy, then went back to buy 5 minutes later and it was gone...
good luck!
Murf
 
If you want a perfect fit, the butt is a must, if close is okay, I made a set of carbide mandrell's for refinishing Southwest, I set the joint at .826, if this works send me the partials and a joint protector with a piece of masking tape aligning the stitch rings. A picture of the joint would be most helpful. Sorry I missed the other thread, I try to help with 314's if I can.
 
Michael Webb said:
If you want a perfect fit, the butt is a must, if close is okay, I made a set of carbide mandrell's for refinishing Southwest, I set the joint at .826, if this works send me the partials and a joint protector with a piece of masking tape aligning the stitch rings. A picture of the joint would be most helpful. Sorry I missed the other thread, I try to help with 314's if I can.
Click to expand...

Thanks Mike,

will take some measurements.

Bgrds
Raist
 
You must log in or register to reply here.
Back
Top