I got into a car accident on sunday, so I'm selling a few cues I dont use to raise money for either repairs or another car.
First cue is a Dan Dishaw, highly figured Birdseye Maple Handle, segmented into 3 pieces separated by brass ring, with Gaboon Ebony Buttsleeve and Forearm. It has his custom ring pack, which is ebony and 'ivory alternative', with brass rings, in the ABCDE locations. Joint pin is powder coated titanium radial made by uniloc. Comes with two shafts at 13mm and joint protectors, weight is around 18.8oz with either shaft. Both shafts contain aegis ferrules and triangle tips. Brand new, havent hit a ball.
http://img519.imageshack.us/img519/8393/img0211j.jpg
http://img199.imageshack.us/img199/1462/img0213fn.jpg
Second one is a Sneaky Pete made by Paul Dayton. Its nicely figured Bocote into Birdeye Maple. It has a radial pin and 1 shaft. Its a regular shaft, not the lakewood shaft. It has a standard phenolic ferrule and talisman tip at 13mm. This cue has been used a few times, and very light bluing bluing in the shaft. It has Joint Protectors and a Dayton Labeled Sleeve. Brown Phenolic collars on shaft and joint area, as well as butt cap. Points are at most quarter an inch apart in height. Weight is 19.1 oz.
http://img16.imageshack.us/img16/9747/img0221tzb.jpg
Both cues were ordered in summer 2007 and received in Fall 2007.
I can bring either to Turning Stone. PM me if interested or have any questions. Sorry no trades, willing to listen to cash offers.
First cue is a Dan Dishaw, highly figured Birdseye Maple Handle, segmented into 3 pieces separated by brass ring, with Gaboon Ebony Buttsleeve and Forearm. It has his custom ring pack, which is ebony and 'ivory alternative', with brass rings, in the ABCDE locations. Joint pin is powder coated titanium radial made by uniloc. Comes with two shafts at 13mm and joint protectors, weight is around 18.8oz with either shaft. Both shafts contain aegis ferrules and triangle tips. Brand new, havent hit a ball.
http://img519.imageshack.us/img519/8393/img0211j.jpg
http://img199.imageshack.us/img199/1462/img0213fn.jpg
Second one is a Sneaky Pete made by Paul Dayton. Its nicely figured Bocote into Birdeye Maple. It has a radial pin and 1 shaft. Its a regular shaft, not the lakewood shaft. It has a standard phenolic ferrule and talisman tip at 13mm. This cue has been used a few times, and very light bluing bluing in the shaft. It has Joint Protectors and a Dayton Labeled Sleeve. Brown Phenolic collars on shaft and joint area, as well as butt cap. Points are at most quarter an inch apart in height. Weight is 19.1 oz.
http://img16.imageshack.us/img16/9747/img0221tzb.jpg
Both cues were ordered in summer 2007 and received in Fall 2007.
I can bring either to Turning Stone. PM me if interested or have any questions. Sorry no trades, willing to listen to cash offers.
Last edited:
