Details below....and for the record, this was a huge pain in the ass. :grin:
Prices may be negotiable depending on the particular cue(s)....but I'm not desperate to sell so won't be giving them away - I'm mostly just kind of bored with them at this point....and my interest in cues has dwindled somewhat.
Please contact me by email at ugotda7@hotmail.com instead of PMing.
There may be a typo or two in here, if anything looks funny (other than the prices, har, har) just ask and I'll confirm.
Olivier: Old “Parica” model, bocote/cocobolo/ivory, purchased directly from Jerry in Texas about 10-12 years ago (don’t remember exactly), has been refinished by Rick Phillippi
Butt – 29”, 15.4 ounces
Shaft – 29 1/4”, Moori III medium tip, 12.40 mm, 3.9 ounces
Shaft – 29 1/4”, Moori III medium tip, 13.05 mm, 3.8 ounces
Joint – flat face ivory with 3/8-10 pin
Wrap – black linen with gold and white highlights
Condition – Very good, about 95%
$1200
Predator Model 6: Earlier design from back in the 90s, purchased from Bamacues here on AZ, plays very nice
Butt – 29”, 15.2 ounces
Shaft – 29”, 12.68 mm, 3.7 ounces, layered tip, 3/4" ferrule, small 314 text by joint ring (to help you Predator experts identify the type of Predator shaft)
Joint – 5/16-14 piloted steel
Wrap – black linen with white specks
Condition – Good, shows some playing time but no issues
$800
Ted Harris Jump / Break: tulipwood, some of the best tulipwood you’ll see in a cue
Butt – 29”, 15.4 ounces
Shaft – 29”, 12.70 mm, 3.7 ounces, non-ivory ferrule, older Moori III medium tip, shows some play (chalk stains)
Shaft – 29”, 12.74 mm, 3.8 ounces, non-ivory ferrule, older Moori III medium tip
Joint – flat face radial pins at both joints
Wrap – black linen with gold and white highlights
Condition – Very good, about 95%
Note – Purchased directly from Ted about 5 years ago; see review of cue here: http://forums.azbilliards.com/showthread.php?t=15577&highlight=harris
$800
McDaniel: birdseye, some of the best birdseye you’ll ever see in a cue
Butt – 29”, 15.0 ounces
Shaft – 29”, 12.92 mm, 4.2 ounces, non-ivory ferrule, non-layered tip
Shaft – 29”, 12.77 mm, 4.1 ounces, non-ivory ferrule, Moori III medium tip
Joint – 5/16-14 piloted steel
Wrap – black leather
Condition – Near mint, 99%
$1000
Lambros Masterpiece Cue: not sure if these are even being made any longer
Butt – 29”, 16.5 ounces
Shaft – 29”, 12.70 mm, 4.0 ounces, Moori III medium tip, Lambros laminated shaft
Joint – piloted wood with 3/8-10 pin (this is not an Ultra Joint, but still provides a lot of feel)
Wrap – none
Condition – Very good, about 95%
$800
Lambros: 2002 merry widow (birdseye, ebony) cue with original Ultra Joint
Butt – 29”, 15.8 ounces
Shaft – 29”, 12.49 mm, 4.1 ounces, non-ivory ferrule, Moori III medium tip, Lambros laminated shaft
Shaft – 29”, 12.48 mm, 3.8 ounces, non-ivory ferrule, layered tip, Lambros laminated shaft
Joint – original Ultra Joint with 3/8-10 pin
Wrap – white linen with black specks
Condition – Good, shows some playing time but no issues; this was my playing cue for quite a while, it plays very well
Note – Got this cue in VA about six years ago from a friend of Lambros who got it from Lambros and had him sign the cue under the bumper (Mike Lambros 06/02)
$1200
Matt Crisp / Sugartree gone.
Mottey gone.
Showman:
Butt – 29”, 15.3 ounces
Shaft – 29 1/2”, 13.10 mm, 4.1 ounces, ivory ferrule, non-layered tip
Shaft – 29” 1/2", 13.00 mm, 4.1 ounces, ivory ferrule, non-layered tip
Joint – 5/16-14 piloted steel
Wrap – lizard
Condition –Near mint, 99%
Note – does not come with Showman case or joint protectors
Price – will keep private, email me if interested
Searing: conversion cue
Butt – 29”, 15.4 ounces
Shaft – 29”, 13.05 mm, 4.1 ounces, ivory ferrule, layered tip
Shaft – 29”, 12.97 mm, 3.8 ounces, non-ivory ferrule, layered tip
Joint – flat face with radial pin
Wrap - none
Condition – Excellent, about 95%
Note – (from description when I bought it) – “This cue was ordered by Steve Mizerak to be given as a gift for a pool player in Steve's room. Steve had ordered two at the same time. Dennis has told me this is one of the last two conversions he has made & ever will make. Dennis marked it with the owners name in very small print see photo.”
Price – will keep private, email me if interested
Judd: Robin Dodson’s former cue, very fancy, tons of work
Butt – 29 1/8”, 15.3 ounces
Shaft – 29”, original, 12.68 mm, 4.1 ounces, ivory ferrule, layered tip
Shaft – 29”, original, 12.70 mm, 4.0 ounces, ivory ferrule, layered tip
Shaft – (new from Judd) – 29”, 12.85 mm, 4.3 ounces, ivory ferrule, layered tip
Shaft – (new from Judd) -29”, 12.85 mm, 4.3 ounces, ivory ferrule, layered tip
Joint – flat face with standard Judd pin (5/16-18?)
Wrap – black leather
Condition – Excellent, about 95%, two original shafts show play, think Judd refinished it shortly before I got it (from Joe Salazar)
Note – Comes with letter of authenticity
$5000
Vollmer: 8 very sharp points – 4 high (with two veneers) / 4 low
Butt – 29 1/4", 15.3 ounces
Shaft – 29”, 12.50 mm, 4.0 ounces ivory ferrule, layered tip
Shaft – 29”, 12.76 mm, 4.4 ounces, ivory ferrule, layered tip
Joint – 5/16-14 piloted steel
Wrap – some kind of black rubbery feeling thing, not really sure what it is but it feels pretty nice
Condition – Excellent, about 95%
Note – Black Boar influence in his cue making and it shows / feels
$3000
Bludworth: ebony and ivory
Butt – 28 7/8”, 16.2 ounces
Shaft – 29”, 12.50 mm, 4.1 ounces, ivory ferrule, non-layered tip
Shaft – 29”, 12.62 mm, 3.8 ounces, non-ivory ferrule, Moori III medium tip
Shaft – 29”, 12.90 mm, 3.8 ounces, ivory ferrule, Moori III medium tip
Joint – flat faced ivory with standard Bludworth pin
Wrap - leather
Condition – Excellent, about 95%
$2500
Carolina gone.
Prices may be negotiable depending on the particular cue(s)....but I'm not desperate to sell so won't be giving them away - I'm mostly just kind of bored with them at this point....and my interest in cues has dwindled somewhat.
Please contact me by email at ugotda7@hotmail.com instead of PMing.
There may be a typo or two in here, if anything looks funny (other than the prices, har, har) just ask and I'll confirm.
Olivier: Old “Parica” model, bocote/cocobolo/ivory, purchased directly from Jerry in Texas about 10-12 years ago (don’t remember exactly), has been refinished by Rick Phillippi
Butt – 29”, 15.4 ounces
Shaft – 29 1/4”, Moori III medium tip, 12.40 mm, 3.9 ounces
Shaft – 29 1/4”, Moori III medium tip, 13.05 mm, 3.8 ounces
Joint – flat face ivory with 3/8-10 pin
Wrap – black linen with gold and white highlights
Condition – Very good, about 95%
$1200
Predator Model 6: Earlier design from back in the 90s, purchased from Bamacues here on AZ, plays very nice
Butt – 29”, 15.2 ounces
Shaft – 29”, 12.68 mm, 3.7 ounces, layered tip, 3/4" ferrule, small 314 text by joint ring (to help you Predator experts identify the type of Predator shaft)
Joint – 5/16-14 piloted steel
Wrap – black linen with white specks
Condition – Good, shows some playing time but no issues
$800
Ted Harris Jump / Break: tulipwood, some of the best tulipwood you’ll see in a cue
Butt – 29”, 15.4 ounces
Shaft – 29”, 12.70 mm, 3.7 ounces, non-ivory ferrule, older Moori III medium tip, shows some play (chalk stains)
Shaft – 29”, 12.74 mm, 3.8 ounces, non-ivory ferrule, older Moori III medium tip
Joint – flat face radial pins at both joints
Wrap – black linen with gold and white highlights
Condition – Very good, about 95%
Note – Purchased directly from Ted about 5 years ago; see review of cue here: http://forums.azbilliards.com/showthread.php?t=15577&highlight=harris
$800
McDaniel: birdseye, some of the best birdseye you’ll ever see in a cue
Butt – 29”, 15.0 ounces
Shaft – 29”, 12.92 mm, 4.2 ounces, non-ivory ferrule, non-layered tip
Shaft – 29”, 12.77 mm, 4.1 ounces, non-ivory ferrule, Moori III medium tip
Joint – 5/16-14 piloted steel
Wrap – black leather
Condition – Near mint, 99%
$1000
Lambros Masterpiece Cue: not sure if these are even being made any longer
Butt – 29”, 16.5 ounces
Shaft – 29”, 12.70 mm, 4.0 ounces, Moori III medium tip, Lambros laminated shaft
Joint – piloted wood with 3/8-10 pin (this is not an Ultra Joint, but still provides a lot of feel)
Wrap – none
Condition – Very good, about 95%
$800
Lambros: 2002 merry widow (birdseye, ebony) cue with original Ultra Joint
Butt – 29”, 15.8 ounces
Shaft – 29”, 12.49 mm, 4.1 ounces, non-ivory ferrule, Moori III medium tip, Lambros laminated shaft
Shaft – 29”, 12.48 mm, 3.8 ounces, non-ivory ferrule, layered tip, Lambros laminated shaft
Joint – original Ultra Joint with 3/8-10 pin
Wrap – white linen with black specks
Condition – Good, shows some playing time but no issues; this was my playing cue for quite a while, it plays very well
Note – Got this cue in VA about six years ago from a friend of Lambros who got it from Lambros and had him sign the cue under the bumper (Mike Lambros 06/02)
$1200
Matt Crisp / Sugartree gone.
Mottey gone.
Showman:
Butt – 29”, 15.3 ounces
Shaft – 29 1/2”, 13.10 mm, 4.1 ounces, ivory ferrule, non-layered tip
Shaft – 29” 1/2", 13.00 mm, 4.1 ounces, ivory ferrule, non-layered tip
Joint – 5/16-14 piloted steel
Wrap – lizard
Condition –Near mint, 99%
Note – does not come with Showman case or joint protectors
Price – will keep private, email me if interested
Searing: conversion cue
Butt – 29”, 15.4 ounces
Shaft – 29”, 13.05 mm, 4.1 ounces, ivory ferrule, layered tip
Shaft – 29”, 12.97 mm, 3.8 ounces, non-ivory ferrule, layered tip
Joint – flat face with radial pin
Wrap - none
Condition – Excellent, about 95%
Note – (from description when I bought it) – “This cue was ordered by Steve Mizerak to be given as a gift for a pool player in Steve's room. Steve had ordered two at the same time. Dennis has told me this is one of the last two conversions he has made & ever will make. Dennis marked it with the owners name in very small print see photo.”
Price – will keep private, email me if interested
Judd: Robin Dodson’s former cue, very fancy, tons of work
Butt – 29 1/8”, 15.3 ounces
Shaft – 29”, original, 12.68 mm, 4.1 ounces, ivory ferrule, layered tip
Shaft – 29”, original, 12.70 mm, 4.0 ounces, ivory ferrule, layered tip
Shaft – (new from Judd) – 29”, 12.85 mm, 4.3 ounces, ivory ferrule, layered tip
Shaft – (new from Judd) -29”, 12.85 mm, 4.3 ounces, ivory ferrule, layered tip
Joint – flat face with standard Judd pin (5/16-18?)
Wrap – black leather
Condition – Excellent, about 95%, two original shafts show play, think Judd refinished it shortly before I got it (from Joe Salazar)
Note – Comes with letter of authenticity
$5000
Vollmer: 8 very sharp points – 4 high (with two veneers) / 4 low
Butt – 29 1/4", 15.3 ounces
Shaft – 29”, 12.50 mm, 4.0 ounces ivory ferrule, layered tip
Shaft – 29”, 12.76 mm, 4.4 ounces, ivory ferrule, layered tip
Joint – 5/16-14 piloted steel
Wrap – some kind of black rubbery feeling thing, not really sure what it is but it feels pretty nice
Condition – Excellent, about 95%
Note – Black Boar influence in his cue making and it shows / feels
$3000
Bludworth: ebony and ivory
Butt – 28 7/8”, 16.2 ounces
Shaft – 29”, 12.50 mm, 4.1 ounces, ivory ferrule, non-layered tip
Shaft – 29”, 12.62 mm, 3.8 ounces, non-ivory ferrule, Moori III medium tip
Shaft – 29”, 12.90 mm, 3.8 ounces, ivory ferrule, Moori III medium tip
Joint – flat faced ivory with standard Bludworth pin
Wrap - leather
Condition – Excellent, about 95%
$2500
Carolina gone.
Last edited:
