Lots and lots of shafts for sale, Predator, Tiger, OB, Bear, etc

thediamond

thediamond

AzB Silver Member
Silver Member
Hi cue (and shaft) fans

Another build up of shafts in the collection and my usual periodic clear out.

All shafts are straight and 29" unless described otherwise in the text. $15 shipping on each shaft anywhere in the known universe. PM me or email to simon.dvali@ntlworld.com for more explicit details.

1) Predator 314, 5/16-18 with pilot, 4.5oz, 12.54mm. Slight warp to shaft: SOLD (Ron Chapman) SHIPPED
2) Predator 314, uni-loc, 4oz, 12.64mm: SOLD (Axio) SHIPPED
3) Predator Z shaft made by Michael Vollmer from a partial, 5/16-14, 3.75oz, 11.90mm, hairline fracture in ferrule: $100
4) Predator Z shaft, uni-loc, 3.75oz, 11.24mm: SOLD (Terry) SHIPPED
5) Predator Z-2 shaft, new, 5/16-14, 4oz, 11.72mm: SOLD (Lei Jia) SHIPPED
6) Predator Z-2 shaft, new, 5/16-14, 4oz, 11.72mm: SOLD (Bobbie Blanchard) SHIPPED
7) Predator Z shaft, new, 5/16-14, 3.75oz, 11.73mm: SOLD (William Chan) SHIPPED
8) Predator Z shaft, new, Radial pin, 3.25oz, 11.69mm: SOLD (Bobbie Blanchard) SHIPPED
9) Predator Z shaft, new, Radial pin, 3.00oz, 11.81mm: SOLD (Almir) SHIPPED
10) Predator Z shaft, new, Radial pin, 3.25oz, 11.82mm:SOLD (Lei Jia) SHIPPED
11) SOLD (Royston) SHIPPED
12) SOLD (Royston) SHIPPED
13) OB Classic Pro shaft, new, 5/16-14, 4oz, 11.7mm: SOLD (David Burleson) SHIPPED
14) OB-2 shaft, uni-loc, 3.75oz, 12mm: $120
15) OB-2 shaft, uni-loc, 3.75oz, 11.8mm, small crack in the ferrule at the top just below the tip: SOLD (David Burleson) SHIPPED
16) Tiger X-shaft, uni-loc, 4oz, 11.62mm: $120
17) Unkown, 5/16-14, good maple, 4oz, 12.76mm, plastic ferrule: $75
18) Unknown, 5/16-14, 4.5oz, 12.99mm, plastic ferrule: SOLD (rick trembley) SHIPPED
19) McDermott shaft, 3/8-10, 3.25oz, 12.49mm: SOLD (Chris)
20) McDermott I-2 shaft, uni-loc, 3.75oz, 11.3mm, SOLD (Louis Drift) SHIPPED
21) Bear shaft, uni-loc, 3.75mm, 13.35mm, one piece ferrule combo for breaking: $70

Let me know if anyone needs anything.

Sincerely

Si
008-13.jpg

009-12.jpg

010-10.jpg
 
Last edited:
PM Sent.

Curious... 7) Predator Z shaft, new, 5/16-14, 3.75oz, 12.32mm: $150

How did you get a Z at 12.3 ? didnt know there was such a thing...

I dont know if you have played with all these shafts or tried them out...

Chances are good Im going to get at least 1 of the 5/16-14's from you possibly more than one...

Im looking for the stiffest.hardest hitting of the shafts you have? any idea which would suit my need?

Also, I have a friend with a McDermott 3/8-10 he is looking for a LD shaft... anyone know what it would cost to have the joint changed from one of your shafts over to that size?
 
Beware_of_Dawg said:
PM Sent.

Curious... 7) Predator Z shaft, new, 5/16-14, 3.75oz, 12.32mm: $150

How did you get a Z at 12.3 ? didnt know there was such a thing...

I dont know if you have played with all these shafts or tried them out...

Chances are good Im going to get at least 1 of the 5/16-14's from you possibly more than one...

Im looking for the stiffest.hardest hitting of the shafts you have? any idea which would suit my need?

Also, I have a friend with a McDermott 3/8-10 he is looking for a LD shaft... anyone know what it would cost to have the joint changed from one of your shafts over to that size?
Click to expand...

Its a mistake is 11.73mm, I didn't even write 12.3mm when I did the measurement so no idea where that came from lol...thank you for spotting it.

I have heard differences in opinion on what constitutes a stiff shaft so I will bow to greater knowledge than my own on shaft stiffness. Sorry I can't help more.

I would personally tell your friend to get an LD shaft with a 3/8-10 joint rather than changing a shaft joint to suit....it will be the same cost if you include the shaft purchase.

Cheers

Si
 
Great shafts offering, got a lot of my favorite Zs. PM sent on 3, 5 and 10.
 
hi there, i'm interested in shaft no.18.if the tip is 12.5 or bigger send me your info on payment....thanks, rick trembley.
 
#1

Interested in #1 314 with slight warp at $60. Do you do money orders? PM me when you get a chance and let me know. Thanks. Ryan
 
#16 the tiger x shaft is it really 40z? Just messing...I know it 4oz but when I say it it made me laugh...is the 3/8x10 an I2 or a regular maple shaft? Thanks
Manny
 
mtorre14 said:
#16 the tiger x shaft is it really 40z? Just messing...I know it 4oz but when I say it it made me laugh...is the 3/8x10 an I2 or a regular maple shaft? Thanks
Manny
Click to expand...

lol...another mistake. The 3/8-10 is just the regular maple shaft.

Si
 
Royston's and Almirs package shipped. No more shipping tubes left in the house. Everything else is going tomorrow when I buy more shipping tubes.

Si
 
Everything paid for is shipped (except Terri....whats your address mate?). 8 shafts left people.

Si
 
Si, I would but I am at the SBE and not sure if I am going to have any money left when I get home.;) it is in the back of my mind though!

Gary
 
You must log in or register to reply here.
Back
Top