LAST CALL. Just wanted to give the people here a shot at these before I sell them elsewhere. Thanks to those who purchased some of them.
Oh, if you guys don't know what the Uni-Mics are (Anvil Mics) read a bit about them on the net. They work like regular 0-1" mics but you can replace the pin with a flat block or pretty much anything that will fit. Good for checking concentricity, lips, hole distances, etc. Wondering if your bore is perfectly centered? These will tell you within .0001 The anvil clamp is also removable so you can accurately measure steps and heights.
I have the following Machinist Tools for sale.
The sales will go to the first person to PM me.
Please give me 8 hours to respond, I will allow the same for payment.
Price does not include shipping.
#1
Mitutoyo Digital IP65 Coolant Proof Micrometers 0" - 1"
Accuracy: .00005 (yes that is 4 zeroes)
Model # 293-344 - With Rachet Thimble
http://www.mitutoyo.com/TerminalMerchandisingGroup.aspx?group=1089
Sold
#2
Mitutoyo Digital Calipers - Absolute Digimatic 0" - 6"
Accuracy: .0005
Model # 500-196-20
http://www.mitutoyo.com/TerminalMerchandisingGroup.aspx?group=1381
Sold
#3
Mitutoyo Anvil Mics 0" - 1" Pin Type, Friction Thimble
aka: Uni-Mics
(Good for tight places, I liked them so much I had a set for work and 1 for home)
$65.00
#4
Micrometers (3) 0" - 3" - Chinese
1" & 2" Measuring Standards included
Depth Mics 0" - 4" - Chinese (Radius at contact point)
*** Forgot to photograph the Measuring Standards but they are 1" and 2" for checking the 3 OD Mics
$50.00 for all
#5
Indicator in fitted box with 3 connectors (Finger type, jeweled)
Small adjustable Magnetic Base
Sold
#6
Depth Mics 0" - 3" Fowler
Sold
#7
Mitutoyo Inside Rod Mics - 2" - 12" .001
Only the 2 smallest rods were ever used, the rest are still factory coated
$125
#8
Brown & Sharpe Heavy Micrometer Head 0" - 1" .001
Model 296-RS
$50
#9
Fowler Digit Mics 0" - 1" .0001
These are not electronic, they count by wheels like the old grocery clickers
$40
Oh, if you guys don't know what the Uni-Mics are (Anvil Mics) read a bit about them on the net. They work like regular 0-1" mics but you can replace the pin with a flat block or pretty much anything that will fit. Good for checking concentricity, lips, hole distances, etc. Wondering if your bore is perfectly centered? These will tell you within .0001 The anvil clamp is also removable so you can accurately measure steps and heights.
I have the following Machinist Tools for sale.
The sales will go to the first person to PM me.
Please give me 8 hours to respond, I will allow the same for payment.
Price does not include shipping.
#1
Mitutoyo Digital IP65 Coolant Proof Micrometers 0" - 1"
Accuracy: .00005 (yes that is 4 zeroes)
Model # 293-344 - With Rachet Thimble
http://www.mitutoyo.com/TerminalMerchandisingGroup.aspx?group=1089
Sold
#2
Mitutoyo Digital Calipers - Absolute Digimatic 0" - 6"
Accuracy: .0005
Model # 500-196-20
http://www.mitutoyo.com/TerminalMerchandisingGroup.aspx?group=1381
Sold
#3
Mitutoyo Anvil Mics 0" - 1" Pin Type, Friction Thimble
aka: Uni-Mics
(Good for tight places, I liked them so much I had a set for work and 1 for home)
$65.00
#4
Micrometers (3) 0" - 3" - Chinese
1" & 2" Measuring Standards included
Depth Mics 0" - 4" - Chinese (Radius at contact point)
*** Forgot to photograph the Measuring Standards but they are 1" and 2" for checking the 3 OD Mics
$50.00 for all
#5
Indicator in fitted box with 3 connectors (Finger type, jeweled)
Small adjustable Magnetic Base
Sold
#6
Depth Mics 0" - 3" Fowler
Sold
#7
Mitutoyo Inside Rod Mics - 2" - 12" .001
Only the 2 smallest rods were ever used, the rest are still factory coated
$125
#8
Brown & Sharpe Heavy Micrometer Head 0" - 1" .001
Model 296-RS
$50
#9
Fowler Digit Mics 0" - 1" .0001
These are not electronic, they count by wheels like the old grocery clickers
$40
Last edited:
