WTB Shafts

[FeltMaster]

I am looking for three shafts, condition is not important just needs a minimum of .845 at the joint and must be tapped dead center.

3/8x10
3/8x8 (unlock radial)
5/16x14 piloted.
Shafts have been purchased.
looking for something inexpensive.

Thanks,
Dom

 

[cfrandy]

How inexpensive?

 

[FeltMaster]

How inexpensive?

They are $30 each on eBay from carlscues and $40 from joerackem including shipping for all but the radial joint. I was looking for some cue builder mishaps and what not that someone may have laying around. If there is nothing out there I will get the ones I can from the dealers listed above and look to get the radial one here or somewhere.
Thanks!

 

[mel_smOg]

I have 5/16x14 piloted
Anwar LD shaft, black collar with 2 white rings
100$ shipped.tiny taper roll, does not affect playablity
PM if interested

 

[FeltMaster]

I have 5/16x14 piloted
Anwar LD shaft, black collar with 2 white rings
100$ shipped.tiny taper roll, does not affect playablity
PM if interested

Thanks for the offer, but let me clarify further, am not going to use these shafts for play, so I am looking for inexpensive $40 or less shafts that you would not play a rack with yourself. Just need a good center bore and at least .845 in diameter at the collar.
Thanks!