I'm selling 4 cues and 1 case.
Cue1:
Schon LTD 1212 (I believe)
I bought this from another AZ member early 2012.
Based on the original F/S thread...
OB Classic shaft, 18.5 oz, Black Kamui Medium.
The original thread didn't mention this, but there are a couple of cracks in the finish.
The cue could use a refinish.
SOLD
Cue2:
Jacoby
Combining my F/S items into one thread.
http://forums.azbilliards.com/showthread.php?p=3647632#post3647632
$450
Cue3:
Dindo Perez
I purchased this on AZ late 2011.
Amboyna burl, six floating points with shadow effects, about 19oz, 3/8x10 pin.
I have 4 shafts for this cue.
- 1 normal shaft
- 2 DPS which is his version of LD shaft. One has a rattle due to a defect
- 1 'no squirt' shaft
The normal shaft and one of the DPS matches perfectly at the joint, but the others have a little bit of diameter difference since they were made after I received the cue.
SOLD
Cue4:
OB
This is a black break cue that I purchased through ozone.
I purchased this early 2010. It has a little bit of finish damage.
The tip needs to be replaced. The tip was chipped during practice, but never got around to replacing it. No damage to the ferrule though.
It has an engraving at the bottom of the butt meaning 'be confident'.
SOLD
Case:
Win
Tooled case by Win. I used it for a while but wanted something a bit more low key so I've been using this as storage.
The strap could use leather conditioner.
All zippers and clasps work.
2x4 case.
$250 obo
SOLD
Please contact me via PM or email (tomohirosato@gmail.com) for more details, offers, etc.
Cue1:
Schon LTD 1212 (I believe)
I bought this from another AZ member early 2012.
Based on the original F/S thread...
OB Classic shaft, 18.5 oz, Black Kamui Medium.
The original thread didn't mention this, but there are a couple of cracks in the finish.
The cue could use a refinish.
SOLD
Cue2:
Jacoby
Combining my F/S items into one thread.
http://forums.azbilliards.com/showthread.php?p=3647632#post3647632
$450
Cue3:
Dindo Perez
I purchased this on AZ late 2011.
Amboyna burl, six floating points with shadow effects, about 19oz, 3/8x10 pin.
I have 4 shafts for this cue.
- 1 normal shaft
- 2 DPS which is his version of LD shaft. One has a rattle due to a defect
- 1 'no squirt' shaft
The normal shaft and one of the DPS matches perfectly at the joint, but the others have a little bit of diameter difference since they were made after I received the cue.
SOLD
Cue4:
OB
This is a black break cue that I purchased through ozone.
I purchased this early 2010. It has a little bit of finish damage.
The tip needs to be replaced. The tip was chipped during practice, but never got around to replacing it. No damage to the ferrule though.
It has an engraving at the bottom of the butt meaning 'be confident'.
SOLD
Case:
Win
Tooled case by Win. I used it for a while but wanted something a bit more low key so I've been using this as storage.
The strap could use leather conditioner.
All zippers and clasps work.
2x4 case.
$250 obo
SOLD
Please contact me via PM or email (tomohirosato@gmail.com) for more details, offers, etc.
Attachments
Last edited:
