3/8X10 Acme Pin Help

Monroe City

AzB Silver Member
Silver Member
Hello all,

I need some help on an old Tim Scruggs cue with a 3/8X10 joint pin.

If anyone has a tap for the pin pictured below please message me.

I would like to have a couple of partial shafts finished and tapped properly.

Thanks in advance.
 

Attachments

  • 6BD31558-C15F-4BAF-B6AB-6B005847EB04.jpeg
    6BD31558-C15F-4BAF-B6AB-6B005847EB04.jpeg
    199.6 KB · Views: 156
Hello all,

I need some help on an old Tim Scruggs cue with a 3/8X10 joint pin.

If anyone has a tap for the pin pictured below please message me.

I would like to have a couple of partial shafts finished and tapped properly.

Thanks in advance.
I don't take work from here but
Mike Gulyassy uses that joint screw.
The downside is the expo is coming, I'm sure he's getting ready for it.
Babys pro shop
 
Hello all,

I need some help on an old Tim Scruggs cue with a 3/8X10 joint pin.

If anyone has a tap for the pin pictured below please message me.

I would like to have a couple of partial shafts finished and tapped properly.

Thanks in advance.
Where are you located? I have the taps, But I am in Massachusetts.
 
Back
Top