Router mount for threading.

muskyed

AzB Silver Member
Silver Member
So I have this Bosch trim router and mount piece I got with it for using on my Mid America lathe but never got around to using it.
As I just got this Numobams 210 machinist lathe I decided to see if I could make it work there. Little harder with that router than I thought and ended up drilling and tapping extra holes to work on the pieces I had, but it is solid. Will be better when I get a quick release for this lathe but I just wanted to see what worked for now.
1000019865.jpg
1000019864.jpg
 
Already did, plus that 1st router mount didn't work as it was about .040 or so high from center. So I remade two router mounts one horizontal with stuff I had laying around, and one vertical with that 1st setup. Also got the lathe mounted on my new tool box.
Was practicing threading with it also and the pvc was easy, the wood took a few tries but I got a pretty decent thread with the bar on the quick release but I need to order one of those live threading mill router cutting bits from Cuefits. They show 3 sizes and not sure what to order.
1000020997.jpg
1000020994.jpg
1000020863.jpg
 
If I were you I would get the quick release set up first and work all the accessories onto it from there.
So for the router live thread mill cutter bit they list 3 versions, any suggestion as to what one if I only order one? or do I need two possibly, or all three? I'm really not going to start a production shop, this is just a self fulfillment thing for me and something new to do in the winter other than my woodturning hobby. The 3 bits listed from cuefits are,
.317 blade dia neck .130
.250 blade dia neck .130
.308 blade dia neck .157 modified flat bottom

I was thinking the .250 one to start?
 
So for the router live thread mill cutter bit they list 3 versions, any suggestion as to what one if I only order one? or do I need two possibly, or all three? I'm really not going to start a production shop, this is just a self fulfillment thing for me and something new to do in the winter other than my woodturning hobby. The 3 bits listed from cuefits are,
.317 blade dia neck .130
.250 blade dia neck .130
.308 blade dia neck .157 modified flat bottom

I was thinking the .250 one to start?
Use the .250 to start. It's pretty versatile IMO, I use it for just about everything.

As for your router mount, buy a secondary router clamp for the vertical mount, so you can quickly and easily swap router over. Amazon sells "CNC mounts" for around $30. That's what I did and it works great. I also use a battery operated router to minimize wiring. It works surprising well and just swap batteries when it gets to one bar of battery life.
 
Use the .250 to start. It's pretty versatile IMO, I use it for just about everything.

As for your router mount, buy a secondary router clamp for the vertical mount, so you can quickly and easily swap router over. Amazon sells "CNC mounts" for around $30. That's what I did and it works great. I also use a battery operated router to minimize wiring. It works surprising well and just swap batteries when it gets to one bar of battery life.
Thank you, I don't think I'll have much use for the vertical mount as I bought a cnc setup also.
 
So for the router live thread mill cutter bit they list 3 versions, any suggestion as to what one if I only order one? or do I need two possibly, or all three? I'm really not going to start a production shop, this is just a self fulfillment thing for me and something new to do in the winter other than my woodturning hobby. The 3 bits listed from cuefits are,
.317 blade dia neck .130
.250 blade dia neck .130
.308 blade dia neck .157 modified flat bottom

I was thinking the .250 one to start?
I think the .130 neck is too fragile and is likely to break using a router.
 
I use it for joint pin installations, works pretty well taking light cuts. The neck length is ideal for this purpose.

For all other cutting, I use a much heavier duty thread mill.
I had two of them I bought from Chis Hightower and the both snapped off right where the smaller shank met the larger one. Fortunately they were still long enough to chuck up in a 1/8 inch collet and use for threading ferrules. I think they were too long for the size of the neck.
 
Here is something else I found. Your mileage may vary as plenty of folks tell me they thread just fine moving away.

I have found it better to cut moving toward the chuck myself, gives a cleaner cut.

I've also found that sealing the wood beforehand with danish oil, glue, sanding sealer, whatever gives a much better thread finish overall. Per your second video, I use a 60deg "engraving" bit to cut threads in locations like this. Height of the point is critical for a clean cut but it works great.

(Before cleanup with wire brush)
 

Attachments

  • 20261119_124617.jpg
    20261119_124617.jpg
    99.2 KB · Views: 7
Back
Top