Break shaft

Hard rock maple shafts are on both of my break cues , but I'm old fashioned and haven't yet crossed over to the carbon fiber side completely yet .

The responses you'll receive will be very different it's just like if you asked which tip works best .
 
CF all the way, even if you are a die hard fan of wooden shafts for playing, when it comes to breaking and jumping, CF is the way to go.
 
Carbon or maple for sure. Definitely not purpleheart or diamond wood. Good basic maple can be fine but I hit with a purpleheart shafted cue and oh boy, the deflection was amazing! Would not want myself. A good solid maple shaft can make a fine break cue still though.

I have a BK4 with a BK Rush shaft. I've had BK Rush full cues and I've also used the wood shaft the BK4 comes with. They all hit about the same, the BK4 shaft is like 95% the equal of the BK Rush...which is pretty damn good at half the price. I just went with the BK Rush shaft to not have to worry about dings, warpage, etc. and the rest of my setup is carbon so you know...it matches.
 
Carbon or maple for sure. Definitely not purpleheart or diamond wood. Good basic maple can be fine but I hit with a purpleheart shafted cue and oh boy, the deflection was amazing! Would not want myself. A good solid maple shaft can make a fine break cue still though.

I have a BK4 with a BK Rush shaft. I've had BK Rush full cues and I've also used the wood shaft the BK4 comes with. They all hit about the same, the BK4 shaft is like 95% the equal of the BK Rush...which is pretty damn good at half the price. I just went with the BK Rush shaft to not have to worry about dings, warpage, etc. and the rest of my setup is carbon so you know...it matches.
Purpleheart and dymondwood are kind of heavy. Im sure they probably deflect more. Why would that matter in a break cue
 
The harder you hit the ball, the more deflection you'll see if center ball is missed. I've always liked low deflection for breaking because of this.
So you would break with a lower deflection shaft and break hard. How does it work with the end of the shaft being lighter or is this a vote for carbon fiber
 
So you would break with a lower deflection shaft and break hard. How does it work with the end of the shaft being lighter or is this a vote for carbon fiber
Low deflection is more forgiving of my terrible stroke. Shaft end mass is the main factor in deflection. Carbon shafts are generally this way, but wood can be made lighter too.
 
Purpleheart and dymondwood are kind of heavy. Im sure they probably deflect more. Why would that matter in a break cue
It doesn’t if you always hit the exact center of the cue ball….but I’m not that perfect and I tend to break with a little pop to my cue ball. With the purple heart shaft that pop would sometimes end up off the table. I’ll take the added forgiveness of not having a shaft with massive deflection to help mask my slight mishits.
 
Carbon fiber is all the rage, but personally I'm not a huge fan, very little feedback and very "plonk" sounding.
I think the best break shaft I ever tried was the Mezz Deep impact H. Maple with a massaranduba core and a short Ivorine-4 ferrule.
Actually I'm working on something similar, however it will be a purpleheart core 😎
 
Carbon fiber is all the rage, but personally I'm not a huge fan, very little feedback and very "plonk" sounding.
I think the best break shaft I ever tried was the Mezz Deep impact H. Maple with a massaranduba core and a short Ivorine-4 ferrule.
Actually I'm working on something similar, however it will be a purpleheart core 😎
I have a raven cf break shaft, I’ve replaced the phenolic tip with a white diamond tip. No “plonk” what so ever.
Get’s the job done, no worries about dings and scratches.

I also have a cheap Little Monster full carbon J/B cue with the original phenolic tip, not much of a “plonk” either.

CF shafts have been around for 10 years, I’m sure that they have evolved over the years, I only know and experience shafts from the last year and a half since I got back to the game
 
I have a raven cf break shaft, I’ve replaced the phenolic tip with a white diamond tip. No “plonk” what so ever.
Get’s the job done, no worries about dings and scratches.

I also have a cheap Little Monster full carbon J/B cue with the original phenolic tip, not much of a “plonk” either.

CF shafts have been around for 10 years, I’m sure that they have evolved over the years, I only know and experience shafts from the last year and a half since I got back to the game
Oh yeah for sure, lots of different ways of doing a CF break shafts. Tube thickness has generally gone down quite a bit in the recent years, that helps with making the shaft more lively. But it's still a distinct feel imo.
 
Oh yeah for sure, lots of different ways of doing a CF break shafts. Tube thickness has generally gone down quite a bit in the recent years, that helps with making the shaft more lively. But it's still a distinct feel imo.
They do feel different but for a break shot I don't think you can tell the difference between a really stiff conical hard maple shaft.
The only difference will be added power and you'll need to take off speed to obtain the same result. This by itself is worth going the CF route for breaking as taking speed down is less tiring and you can stay consistent during a longer session/tournament
 
I have a raven cf break shaft, I’ve replaced the phenolic tip with a white diamond tip. No “plonk” what so ever.
Get’s the job done, no worries about dings and scratches.

I also have a cheap Little Monster full carbon J/B cue with the original phenolic tip, not much of a “plonk” either.

CF shafts have been around for 10 years, I’m sure that they have evolved over the years, I only know and experience shafts from the last year and a half since I got back to the game

Those are nice, very nice for the money! Friend has a Raven break cue and I was trying it the other day next to my Predator and it holds up.
 
Those are nice, very nice for the money! Friend has a Raven break cue and I was trying it the other day next to my Predator and it holds up.
Mine is also on a Predator BK2, a $200 upgrade and I don't think it's inferior to the $800 and more BK Rush, especially when I couldn't find any changes to the butt construction. Same C4 construction with a Uni-Loc joint.
 
Like Rusty said, Different strokes for different folks.

I use a Purpleheart shaft with a C4 tip and absolutely love it.
I use one of your purple-heart break shafts as well. Absolutely no complaints. Performs very nicely.
👍
 
I use either maple or purpleheart, it really depends on the overall weight of the cue I'm going for. Both can break very hard with lots of control.

I will admit that CF can be a little more efficient than maple, but PH is similar. I play with a CF shaft, but prefer wood for breaking 🤔
 
Back
Top