Recent content by 92GTA

For sure! I actually plan on using the inside of the side panels :thumbup:

I thought I would bring my old thread back from the dead :grin: The weather is just about perfect now to finally start the project, I had to move last year so I postponed the project. I just bought from Formby's paint remover wash from Walmart and I'll be taking apart the table and stripping...

Anyone care to answer his question instead of trying to change his mind? I plan on the exact same thing with the home table that I'm restoring... Alex

Ok will do, thanks!

K66 it is then, excellent. Thank you guys for the help and confirmation so I can order the parts with confidence! 1 more thing, my rails don't have a raised cushion guide on the center of their face lengthwise that fits into the molded impression in the cushions to assure they go on perfectly...

This measures 1 2/16"

That measurements is definitely 1 3/16".

I seem to have a no-name table so I am trying to figure out what profile rubbers I have to order some new Artemis cushions. Please take a look at the below pictures of one of my rails without the rubber and with. Also note that measured from the slate to the top of the nose of the cushion is ~...

The top of my slate is about 30 3/4" from the floor so it looks like I'll leave it alone. The top of my wooden side rails from the floor is about 32 1/4". Thanks!

All the pics I have so far are here: http://forums.azbilliards.com/showthread.php?t=274305 It has written on the head slate that is was built by SLO Billiards with a date in 1997. I suppose I could call them and see if they know.

Exactly what I had in mind :thumbup:

I need to figure out exactly what my table is first, but to answer your question I simply want the correct height. If the height it correct the way it is, I won't bother.

Thanks for the info guys. I think I might just have an knock-off. So, before I go buying poplar, from the floor to the top of the slate, what exactly should be the height?

Then I guess I have a cheap knock-off :frown:

Ok fair enough. I'm sure it will play fine but is there anything you guys would suggest maybe to put between the slate and frame anyway or just go without? I have the table apart down to every single piece stripping and refinishing the wood so now's the time when I reassemble if I'm going to...