epoxypop's latest activity

How hot do those coils get, Maybe i'm wrong but i'm thinking you need at at least 500 degrees . Which might melt all of the epoxy all...

My question is more why you are buying Predator cues when you clearly want cues with 5/16-18. Changing the pin is always a risky thing...

I take thst back after carefully looking at the pics i'm seeing the collar fastened to the phenolic that's a high dollar repair or...

I've not yet removed a titanium pin, ,however i have removed a few others but my guess is a propane torch . You're not cutting the...

Couldn't you just use the threads on the inside and the extension to run the insert in tight?

One thing I would add, cuefits sells them in .866 and .985 diameters. There is enough bolt head to shape in order to fill the .866, I...

pm me 4 of them for sale on mkt place here in the midwest

Yeah, but the question is how big do you need to bore to remove the entire original insert.

His original post described why he wants them long. He wants to make a billet that he can cut into shorter pieces that are at finished...

I'm a hobbiest. I use those same nylon bolts to make extension inserts for my cues. I cut the bolt head to the right size, then use the...

Let me clarify, I was speaking solely about the Huebler repairs. When I did those yrs ago, I didn't think to use a threaded nylon bolt...

The plug was maple the insert is nylon

Just asking does that half inch maple plug leave enough for that half inch 13 thread to hold onto

I haven't had to, outside of a couple hueblers back in the day due to cross threading. Had no issues boring them out with a 1/2 endmill...