I am looking for someone to change the radial pin on a True Splice 16 and LE3 to 5/16x18. I had someone local in NYC do one for me which came out perfect but he is too busy with other work to do another. Not a super difficult job but harder than usual.
1st, b/c Predator embed the pin in a big phenolic cylinder. Which has to be drilled out and filled with maple. 2nd, removing the pin is also a bit harder than usual b/c it is titanium and an electromagnetic induction coil gun will not work to heat it like a steel pin.
Thanks,
-Alex
These are the (before) factory Predator phenolic/radial pins.
This is converted to 5/16x18 (after):
1st, b/c Predator embed the pin in a big phenolic cylinder. Which has to be drilled out and filled with maple. 2nd, removing the pin is also a bit harder than usual b/c it is titanium and an electromagnetic induction coil gun will not work to heat it like a steel pin.
Thanks,
-Alex
These are the (before) factory Predator phenolic/radial pins.
This is converted to 5/16x18 (after):