Search results

I forgot to specify that I also put spring washers on the square plate, we had problems with the cup washers, the edges of these washers are sharp and they cut and eat the wooden slate reinforcements in wood pine and that's where the rails fall loose.

😲😲🤣🤣

On the Coke!!!

15 ft/lbs is a lot and a bit too much for my feeling, I'm more comfortable with 12 ft/lbs, I replaced the cup washers by homemade square washers 2 x 2 x 1/4 inch the feeling is not the same, that's tight harder.

In fact this is a first cloth for testing purposes but if the results are good we will probably order 1 or 2 rolls, so I will go with your index measurement and take notes as you say on what this gives the stretching of the second long side or the total stretching of the long side and we can...

The goal is for the cloth to be stretched equally in both directions and at the same time stretched like a guitar string, but without knowing any measurements it can take quite a bit longer to achieve the right result, Thanks Professor!!

Good Thank You for this answer RKC, I understand very well what you have just explained there, but it is to find the right index to be able to stretch it equally in both directions and that they are well stretched everywhere, if you leave with less or more stretch on the side the work will not...

Oh, if anyone can give me some advice that would be great!

We are about to install our first 3030 and I read somewhere that these cloths stretch a lot more than the Simonis, are there any known stretch indexes for these cloths? Thanks!

Thank You!

What's happened, Shane vs Sossei?

We bought 10 rolls of this neoprene, good quality and very low price, I then finished them to 3/16'' thick with a disc sandblaster, it does a perfect job, this sandblaster is an incredible tool! https://www.amazon.ca/gp/product/B005FNGX6W/ref=ox_sc_act_title_11?smid=A3DWYIK6Y9EEQB&psc=1

Okay, but I just had doubts that most major brands use K55s, Thanks for your help!

Grabiel pool table, on their site, they use P59 Klematch and it's said that's a profile like K55!

I wasn't trying to contradict you, I was just trying to understand my best option with what I read here, that's all!

Ok that's your choice, but from what I seen here K66 play well at 1 3/8'' nose height with 1 5/8 or less subrail and K55 play well on 1 11/16 subrail and nose at 1 27/64'' but wich one play better, I don't know that's my interrogation, I don't think that I'm wrong at all!

No, I never ask you the best between k66 or rails modifications with K55, we never talk about that, and why hign end table are all with K55? Thicker rail with K55 is not better than 1 5/8'' with K66, that's my interrogation!

You said that K66 are 1/8 higher I think, here we have K55 on 1 5/8'' and the rebound are not good, I have somewhere in my head that I would be better to adjust the rail and keep the K55 than just go with K66.

Yes it's a fact, my little intrigue is that with 1 5/8'' rails I should choose the K66, but all high end tables have K55, there must be a reason for that, the K55 cushions are bigger than the K66 and can surely take bigger hits. Here I'm lining up to do a big rail job and I really want to get...

Okay, but apart from that fact, maybe this principle of filling the back of the cushion is not so bad and that it could apply to wooden rails. Perhaps no company has the best table across the board, but the Predator frame is certainly one of the strongest. Yes I saw rails deformed by punches...