Search results

just a late night bump

Any offers? This is a real nice cue

This is a 6 point nova with 1 shaft, 12.80mm. Unknown non layered tip but it could be replaced. Bem forearm with 6 points, I,m not sure of the wood in the points or the butt. Looks like goncalo alves. 19.2 oz. The cue has 1 small nick in the forearm not large enough to show up and a air bubble...

just another bump

pm bump....................

Here's a real nice sly j/b that I hate to get rid of but here goes. Cored african blackwood forearm with a kingwood handle. Slotted rings at a,b,e. Phenolic ferrule with a phenolic tip. Unsure of the weight, my scale is broke but I would have to say around 19.5. White phenolic joint. I bought...

I'm using the 2 part 20 min finish cure epoxy from cue components. I've used it on plenty of joint protectors now the problem is coming when I'm applying it to a cue. One cue was a poor refinish job and one is on a cue I just finished. Both are having the same problem. Maybe I'm putting it on to...

No, I thought the epoxy is suppose to be the sealer

Now I'm having the same problem with the cue. I sanded it down to bare wood all the way to 1200 grit. Took a cheese cloth to it and then mixed up the 2 part epoxy at 1 to 1. I applied it with a brush then spun the lathe very slowly by hand for a few minutes to let it even out. After a few...

It is hard maple. I got lucky, I found it on ebay over a year ago. I got a 2x2x60 piece for 12.00 kiln dried. Curls from top to bottom. Just type in hard curly maple and you'll get some nice pieces once in a while. Hope this helps

Also beware of a scumbag posting on cl from arizona that goes by the name of frank wielander. He got me for 400.00 2 weeks ago. I don't think that's his real name but that's what he goes by. After i thought something was up i did a search on him and it lead me to a post about him here. He his...

No, it's going to have a small push in bumper like a sw. I cut the groove very tight so the diameter fits in about 1/8 so it has a very clean look to it. It looks like the bumper flows right into the butt.

Thanks for all the kind words. I know my picture taking abilities are a little rough. I think when it's all done I might send it a couple of peoples way to get some feedback on it. It might be a good way to get my cues out a little further away than the local pool halls. I might ask for...

Here's a couple of pics of the butt where they mostly are. I thought the problem was with the clear so I stripped it off and lightly sanded but it seems to be in the sealer or something else. I know it wasn't there before because I've had this cue for the last ten years and I figure I would get...

Here's a couple of pics of my first completed cue. It's only got the sealer and not the clear coat but I thought I'd show it off anyway. It's actually the 3rd cue I made, the first 2 were train wrecks. The pin was off centered on the first and I had to be a gluton for punishment and attempt...

I recently got a cue back from being refinished and it came back with small white dots the size of pinheads in the finish. Does anybody know what would cause this and how to get rid of them? Thanks in advance

one last bump before it goes to the bay

Does anybody have any more info on this scumbag? I think he got me for 400. I dont think thats his real name or number, frank wielander with that address has been dead for a couple of years I was told after I got that addresses number so i think he stole his identity and using the old lady who...

early am bump

lower price bump