Search results

Hay Everyone, I am Back from Hibernation. I had to take to take some time off for for family reasons and health reasons. I listed couple lathes on Ebay that I have sitting around 90% complete. Here are the listing links...

I have 3 of those headstock put together, so I am offering a basic repair lathe setup with 48" bed and 10" gear rack, carriage with Delrin gib and larger hand wheel, tail stock with dual live center, 5-PC carbide indexible cutters and 3 collets, plus one steady rest with collet. All for only...

I have been making those hand wheel adapters for Taig carriages for over a year now. It converts your standard 1.85" Taig Hand Wheel into 2.75" hand wheel with a larger Delrin handled instead of the small brass handle. Anyways my machinist misunderstood the quantity I ordered, so instead of...

Last summer while I was in Vegas for the APA. I was asked if I could come out with a new chuckless or keyless repair lathe. After 6 months, it's finally done. To speed up repairs and reduce the risk of injury. Here is my new 5C collet headstock concept with a new carriage concept too...

I recently ordered a new batch of driver pins. In addition for the standard 12pc set. I now have added Cognoscenti driver pin. Driver pins can be purchased individually @ $18 each or in a set There are 4 sets to choose from 9-PC. @ $150 11-PC @ $180 12-PC @ $195 13-PC @ $210 You can make up...

Up for sale is a bunch of Taig U-Channel and Dovetail. Since I have my own H-channel design, I have decided to part off with all my U-Channel stock for all the guys that like to build their own Cue Lathes. The pricing will be as follows: U-channel $10/ft Anodized Dovetail $15/ft 3 bed footing...

Up for sale is a brand new Hanbat butterfly cue with 2 shafts Retail $550 Sale price $499 with free shipping plus 2 black Kamui tips installed Package value well over $625 for only $499 ($126 off) You can email me at cclatesllc@gmail.com or call me on my cell 248-884-4469. Thanks Bassel

Check out my new website. It has been remodeled and some what updated. There still is some missing accessories and one mistake in the accessory section. I will fix that soon. Over all , I am very happy with the new design. Merry X-mas to all and hope you have a Happy New Year Best Regards...

Last summer I build 3 finishing lathe Headstocks, using a Taig headstock housing, a 3/4" keyless chuck with solid spindle. The idea behind this lathe was: in tournaments, cue repair guys make more money based on how fast they can turn around shafts (tips, cleaning, ferrel, ect.) So if you have a...

This Year has been very good to me in many ways. I have had many good months and some very bad months, but at the end I feel I am in a much better place than I was last year. Although I wont have many sale items this year, but I promise that the savings will be there. Black Friday Special: 2 X...

In light of the devastating disaster Hurricane Sandy unleashed on the east cost (New York, New Jersey, etc.) I have decided to donate 10-15% on all Cue Lathes Models and 15-25% on all Accessories sold in the month of November to the Red Cross Relief fund. Also everyone can donate $10 right now...

Any interest in a cognoscenti driver pin 7/16"-11. I had couple of requests, but unfortunately it would be too expensive just to make 2 of them, so I figured I would post to see if its worth while to make 10-20 of them. No need to pay upfront, just want to see if there is a need to make a small...

I had 4 taig beds, that I purchased a while back for a special project. Well I never had time to do that so here is what I put together. A basic cue repair lathe with taig bed and a 2' extension with one steady rest collets, cutters and live center, along with my 1/3hp DC motor and speed control...

I had 4 taig beds, that I purchased a while back for a special project. Well I never had time to do that so here is what I put together. A basic cue repair lathe with taig bed and a 2' extension with one steady rest collets, cutters and live center, along with my 1/3hp DC motor and speed control...

I am trying to clear up Some U-channel bed inventory, so I will be selling them at a steep discount. Those would be perfect for anyone trying to build the own lathe using taig parts, or to replace existing lathe bed that are worn out. I have 3 x 4' beds with 10" gear rack @ $175 each 2 x 38"...

Up for sale is the all new steel construction with 5 steel holders. Comes with a cut off blade and mounting base for one of the following: Taig, Porper B, all Cue Smith lathes, all Todd's lathes and of course all my cue lathe models. Also could work on all small metal lathes 7" x 10, 7" x 12"...

I went through my inventory recently and realized I still have one Basic Repair Lathe and one Ultimate Repair Lathe. those 2 units will be offered at closeout pricing. The Basic Repair Lathe comes with a Big Bore Headstock, 48" bed, one Steady Rest with collets, cutters and a complete Tail...

Here is a newly built customized Tool Box lll I build for a good customer of mine. This lathe has been customized with H-channel, Heavy Duty Gear Rack, and Bindless Carrriage, and extra long 60" bed. this lathe is basically an ultimate repair lathe made portable with a new tool box design. Best...

Just got those today from my supplier All Steel Body QCTP, same size as the A2Z QCTP. The new Steel Body QCTP comes with 5 holders ( 2 standard, one 3/8" boring bar holder, one cut off blade holder and one knurling holder) I will have Taig mounting bases made up with in the next week. I will...

I have 2 Units of the Ultimate Repair lathe built with my old H-Channel that I will be selling at a discounted price. Those 2 units will have 48" bed with 42" heavy duty Gear Rack plus the 4" bindless carriage. The promotion offer is: 7-pc indexible cutter upgrade ($50) 2 free Solid Carbide...