Search results

I have a friend with the same complaint. He ended up taking his Roomba vacuum and just let it run around on the table for a few hours. It largely solved his complaints but had a hard time reaching the shelf inside the jaws of the pocket. He worked on those by hand. Table now looks like new...

Or get a Roomba and let it loose for a couple hours....

I have numerous Meucci shafts available, in various conditions, that I'd be happy to part with at reasonable cost. DM if you are interested.

Yes, all Meucci product is currently coming from the US

Then just make one. Tomahawk would work nicely.

I install many many tips every week, for some of the best players in the area I live, and 80%+ settle in on the Hybrid Max. They're easy to get, reliable, and the price has come way down..

I have about 15 Meucci's for sale right now. I'll send you a PM so we can chat about them to see if there is anything of interest to you

I just buy the adapter with the smallest hole possible, which is 5/16x18. I then simply bore and thread the aluminum just like any other piece. This has worked just fine for me several times now. This works only for large pins. In my case, I needed several done to 7/16 x 11. Worked great.

I may have one. Send me a picture of the joint ring so I can verify if it is the right one

Why not just use a jewelers saw in a router? I've use the same one for two years now. Quick and easy..

IMHO, I really like it. Sometimes "too much" is just right, depending on the occasion. With the right finish over it so it feels wrapless, and a fairly plain forearm and butt, the possibilities are endless. If I had any experience or talent in this type of rod work, I would definitely...

I have a handful of David Howards, but that isn't quite the same thing...

I have an Original J-Hook in 9/10 condition. PM if interested

I have all of these available.... PM if interested and I'll get you specifics and pricing.

If you haven't already sold it, PM me, I'll buy the HSU shaft

I've done numerous Predator wrap changes. They are a bit of a PITA but if you know the "secret" , they're not actually that bad.... Talk to anyone who does golf club grips... I don't mind them at all anymore..

I tore the whole thing down to the bare bones, all of the headstock, both chucks, etc., and put it all in my deep ultrasonic cleaner. I then put it all back together and used a small amount of Locktite Blue on the threads of the left chuck. Tightened it as tight ad my hands could deliver...

Recently, I've had five occurrences of the left chuck on the headstock of my Cueman Deluxe lathe. In each case, the work I had in place was ruined. I have cleaned both sides of the threads thoroughly, and have tightened the chuck down with all the force that I can apply with one punch in both...

No, I sold it in one day for the full $1200 asking price

You posted that you sent me a PM about a Sniper 3 Break/Jump cue but I've not seen anything. If you are interested, please let me know.