Search results

I cannot say if they will damage the pockets or not 100% however you are creating outward force on the bond between the rubber and the rail wood. If left in long enough and the spring is strong enough it could in theory separate the rubber from the wood. I also like most others here, do not...

call around to rental places. i know a local one to me has one.

i usually just grab the t50 3/8 ones this way if the table is damaged where you staple it in, it holds, but honestly you can use whatever size you want that will hold tight. I wouldn't suggest 1/4 inch though. It really all depends on the wood you are going into more than anything. If its...

There are no threads to tap in the hole. You can push the bolt all the way in without resistance.

Upon closer inspection it appears to be pewter/Babbitt. So how do I fix it?

these go through the side of the slate

Sorry but i didn't make it clear in the original post (I've went back and edited it) I meant the holes in the slate are stripped not the ones in the bolts.

sorry i should have made that more clear the slate is stripped Im going to edit that to read clearer thank you

I am recovering an 1905 pool table. It has the old style rail bolts with two holes that bolt into the slate however, the holes are stripped out*****EDIT: the holes on the table not the holes on the bolt*****. Is there any way to fix this issue? I was thinking drill bigger and put in a heli...

How is texting not talking. I never said I spoke with Tom I said I talked to him. I'm sorry if you took that as something it wasn't. Should I have said conversated. I'm sorry. I didn't realize I had to be specific. Ok let me be specific. I conversated with Tom Hay through non verbal means...

First, I never said I spoke to you on the phone. It was either on here in private messages or in text. And since I can't find it on here it had to have been texts. I have never technically spoken to you. But we did have a conversation because I was asking you a bunch of questions. And it was...

I am a repair person and I install both Outsville and Ultraskins. Honestly I don't shoot with either. Both are really great for some and both I have been told are complete junk by others. I have played with both and honestly they both are really good tips. With that being said, the very...

Ok so I figured it out. What I thought was k55 (because that is what I ordered) is k66. So when compared to the k55 it looked smaller. Now that I'm home I was able to measure it and sure enough they sent me the wrong rails. So it wasn't that it is so much bigger than k55 it was that i didn't...

My sister isn't this big. This shit is huge. But seriously, I realise there is no picture, however is there even a profile bigger than k55. I haven't seen any.

Got another one for you guys. I have a set of rails off of a Handy, but when I pulled it off it is considerably bigger than k55. It's almost a1/16 th wider and to the noise is almost an 1/8 th inch. Don't have pics right now but I'm comparing it to brand new k55 and it is easily bigger. Any ideas.

Yes I think so. Why pass? just curious?

rest of pictures

ironically i took pics with both i only uploaded the ones with micrometer cause i figured it was more accurate. Here are the others. Not sure of make of table because that plate is long gone and only markings i could find was where it was stamped slate so that helps none. I do know its an old...

Ok so I was able to get over there and here is what I found. The rail rubber from base (part you glue) to nose is .831 inch or 21.12mm. The width of the base is 1.047in or 26.46mm. From what I can tell from the pic I found on one of the sites, this appears to be closest to the u23 profile...

I haven't seen them, and up until now I've only replaced valley ones (and they all took the exact same rails) and one drop pocket table. Mind you I have done 23 sets of them but short of the one set I did on a drop pocket table where the owner had ordered everything to do it himself and just...