After a lengthy 15+ year hiatus from pool i got the itch to bang balls and wanted to try a longer cue because i shrank a couple of inches so i contacted my old friend Dean ( azb member "deanoc" ) with regards to who was a good maker with reasonable lead times. Without hesitation he said "John Chaplin" or "JC" on the board.
i contacted John, gave him my desired specs and received my cue in a timely fashion.
John is unusual, he didn't promise anything and delivered a LOT.
The cue i ordered:
60" even split
19 +- oz
bumperless " HOPPE " butt, sans ring
FF wood to wood joint with 3/8 X 10 joint screw
HEAVY. close grain shafts, One conical (stiff) original SW/KERSENBROCK taper and the other a longer (pro) G. SZAM taper
i wanted him to keep in mind that a cue's tonal qualities and feedback are important to me
wood i like ( with weight being a consideration ) are, maple, bubinga, purple heart, etc.
The cue i received incorporated EVERYTHING we talked about.
The shafts weigh a whooping 4.3 oz without inserts
the shafts and butt are LASER straight apart and together
although i didn't order premium tips i received moori's
it rings like a steel jointed SCRUGGS with IV ferrules
adam
Although a banger i've owned a few DPk'S, over 50 SW, 15+- G SZAM, handfull B SZAM, 8 +- SEARING, a couple BUSHKAS, etc., etc., etc.
Can still appreciate a fine cue that's made the right way with quality components
I'll see if John has pics of my cue and if he'd like to post them on this thread
i contacted John, gave him my desired specs and received my cue in a timely fashion.
John is unusual, he didn't promise anything and delivered a LOT.
The cue i ordered:
60" even split
19 +- oz
bumperless " HOPPE " butt, sans ring
FF wood to wood joint with 3/8 X 10 joint screw
HEAVY. close grain shafts, One conical (stiff) original SW/KERSENBROCK taper and the other a longer (pro) G. SZAM taper
i wanted him to keep in mind that a cue's tonal qualities and feedback are important to me
wood i like ( with weight being a consideration ) are, maple, bubinga, purple heart, etc.
The cue i received incorporated EVERYTHING we talked about.
The shafts weigh a whooping 4.3 oz without inserts
the shafts and butt are LASER straight apart and together
although i didn't order premium tips i received moori's
it rings like a steel jointed SCRUGGS with IV ferrules
adam
Although a banger i've owned a few DPk'S, over 50 SW, 15+- G SZAM, handfull B SZAM, 8 +- SEARING, a couple BUSHKAS, etc., etc., etc.
Can still appreciate a fine cue that's made the right way with quality components
I'll see if John has pics of my cue and if he'd like to post them on this thread
Last edited: