3/8 - 16 weight bolts

SpiderJerusalem

SpiderJerusalem

The Brink of Apocalypse
Silver Member
Does anyone know where I can get some 3/8-16 weight bolts? I need a 2 ounce, a 1.5 ounce, and a couple of 1 ounce bolts. If I can't find any, I'll probably just buy some brass or stainless threaded rod and make the ones I need. Thanks!!
Ryan
 
atlas has 1" bolts that weigh .34 of an ounce each. That's 6 bolts to get the 2 ounces i need for one cue and 6" of threaded space required inside the cue. I need longer bolts that weigh more per each bolt.
Thanks again!!
 
Duane Tuula said:
I've gotten them at my local hardware store. They come in hex heads. Cheap item too.
Click to expand...

I second this, both Ace Hardewares in my town have them in various legths. They do not have a scale so I suggest you buy a bunch and take them to the post office to weigh them if you don't have anything at home.
 
I didn't know the hardware stores and home depot had them- i've always ordered in bulk. Hopefully they have the longer ones. you're looking for.
No need for a scale, 1" = .35 oz.
When you do install them put a dab of silicone at the end facing into the cue and install it all the way down. This will keep them potentially making noise.
If you don't have a set of 9" t-handle hex head drivers you'll need to pick one of those up too. I believe the 3/8" bolt takes a 3/16" hex driver.

-Mike
 
You must log in or register to reply here.
Back
Top