No longer needed.
Last edited:
3/8" x 10 shaft for McDermott
- Thread starter StrokeofLuck
- Start date
The biggest problem you might run into is your Cues joint size.
McDermott Cues range from .835 to .860 o.d.
They also have different joint screws, the most popular for them today is the 3/8x10 and the 3/8x16 quick release.
Hope this helps.
Thanks, yes I'll have to find a calipers to put on the OD because I hate poor fitting in that area.
Post some numbers and maybe you can find some offers. I have numerous 3/8x10 shafts around, several are brand new McDermotts.
Prison break
2 9 7 8 a
re: 3/8x10 shaft
I have one 3/8x10 wood shaft matching your description.
29"inch length
1/2"inch solid black collar
4oz total weight
13mm at ferrule
22mm diameter at collar edge
Canadian rock Maple
Tip is ok, should be dressed
Ferrule lots blue chalk
Otherwise, shaft is clean and straight top to bottom.
It's original to my cue butt 20 years old approximately.
if you're interested, I'll post a few photos.
let me know
Last edited:
Thanks all, I have found one.