Here's the deal: I've been searching for the perfect player and I've found it. Which means all the players that I've had made and bought are ready to go to new homes. They are all solid. They all play amazing. They are all straight together and apart. I keep everything temperature controlled, never in the car without A/C. They may have some minor blemishes here and there. They are PLAYERS, not closet queens. They NEED to be shot with!!!!
All prices include shipping UPS ground within the continental US with upgrades the responsibility of the buyer. I will accept PayPal, Venmo and CashApp. If there are fees, buyer is responsible.
SHAFTS, all 3/8x11 pin:
1. Random shaft with mineral mark: $OLD
Bought from "$TAKE HOR$E" on AZBilliards in April 2018. Thought to be a Richard Harris from a sneaky pete cue but Richard doesn't remember it. I doubt he would send out a shaft with such a crazy mineral mark. It plays solid though. Could be a great bar beater or break shaft!
Shaft length: 29”
Joint diameter: 0.835 inches
Tip: Kamui black medium @ 13.10mm below ferrule
Shaft weight: 4.09 oz
2. Bob "The Captain" Manzino: $OLD
Bought from "$TAKE HOR$E" on AZBilliards in April 2018. This is pretty much BRAND NEW with a NATURAL ferrule. I've only hit with it a couple times. Beautiful ringwork. I wish I had a cue to match with it. These are $250 new at least, probably more now.
Shaft length: 29”
Joint diameter: 0.831 inches
Tip: LePro @ 12.8mm below ferrule
Shaft weight: 4.16 oz
3. Ron Haley: $OLD
Bought from "$TAKE HOR$E" on AZBilliards in April 2018. This is the longest and stiffest taper! Very, very cool shaft and it plays lights out!!!! It does have a good amount of bluing....it was very well loved in its time
Shaft length: 30”
Joint diameter: 0.845 inches
Tip: Ultraskin Pro medium @ 12.95mm below ferrule
Shaft weight: 3.46 oz
4. Keith Josey "Zero": $OLD
Custom made for me by Keith Josey in 2019. This is his laminated veneer low deflection maple shaft. Very stiff, great feel! Slight bluing.
Shaft length: 30”
Joint diameter: 0.843 inches
Tip: Barioni Super Grip tip @ 12.75mm below ferrule
Shaft weight: 4.44 oz
5. Bob Danielson "SS360/P": $200
Custom made for me by Bob Danielson in 2019. This is his pie segment low deflection maple shaft, very similar to Predator. I think they play better than the 314. This taper is a very long pro style!! It rises significantly about 2/3 down. Great shape, very little bluing.
Shaft length: 30”
Joint diameter: 0.837 inches
Tip: Barioni Super Grip tip @ 13.25mm below ferrule
Shaft weight: 3.56 oz
I have other close up pics as well, just ask
All prices include shipping UPS ground within the continental US with upgrades the responsibility of the buyer. I will accept PayPal, Venmo and CashApp. If there are fees, buyer is responsible.
SHAFTS, all 3/8x11 pin:
1. Random shaft with mineral mark: $OLD
Bought from "$TAKE HOR$E" on AZBilliards in April 2018. Thought to be a Richard Harris from a sneaky pete cue but Richard doesn't remember it. I doubt he would send out a shaft with such a crazy mineral mark. It plays solid though. Could be a great bar beater or break shaft!
Shaft length: 29”
Joint diameter: 0.835 inches
Tip: Kamui black medium @ 13.10mm below ferrule
Shaft weight: 4.09 oz
2. Bob "The Captain" Manzino: $OLD
Bought from "$TAKE HOR$E" on AZBilliards in April 2018. This is pretty much BRAND NEW with a NATURAL ferrule. I've only hit with it a couple times. Beautiful ringwork. I wish I had a cue to match with it. These are $250 new at least, probably more now.
Shaft length: 29”
Joint diameter: 0.831 inches
Tip: LePro @ 12.8mm below ferrule
Shaft weight: 4.16 oz
3. Ron Haley: $OLD
Bought from "$TAKE HOR$E" on AZBilliards in April 2018. This is the longest and stiffest taper! Very, very cool shaft and it plays lights out!!!! It does have a good amount of bluing....it was very well loved in its time
Shaft length: 30”
Joint diameter: 0.845 inches
Tip: Ultraskin Pro medium @ 12.95mm below ferrule
Shaft weight: 3.46 oz
4. Keith Josey "Zero": $OLD
Custom made for me by Keith Josey in 2019. This is his laminated veneer low deflection maple shaft. Very stiff, great feel! Slight bluing.
Shaft length: 30”
Joint diameter: 0.843 inches
Tip: Barioni Super Grip tip @ 12.75mm below ferrule
Shaft weight: 4.44 oz
5. Bob Danielson "SS360/P": $200
Custom made for me by Bob Danielson in 2019. This is his pie segment low deflection maple shaft, very similar to Predator. I think they play better than the 314. This taper is a very long pro style!! It rises significantly about 2/3 down. Great shape, very little bluing.
Shaft length: 30”
Joint diameter: 0.837 inches
Tip: Barioni Super Grip tip @ 13.25mm below ferrule
Shaft weight: 3.56 oz
I have other close up pics as well, just ask
Attachments
Last edited:
