3 axis cnc mini mill

[camargored]

Heres a 3 axis minitech machinery mini mill .This mill works .got it from a school auction .But i dont have the software .Its 250 on minitechs website .Icant progran gcode or conversational .so its of no use to me .Its in KY and what you see is what you get .Mill and transformer .I think its shippable. So make me a resonable offer and its yours .Ifnot ill put on Ebay.Any questions just ask ill try to anwser them Thank Red

 

[camargored]

more pics

Here the rest of the pics i have i can take more if needed.

 

[shotmaker]

Bad Deal

Here the rest of the pics i have i can take more if needed.

Yeah I bought this mill. It appears that it may have not run for quites sometime. This guy had me meet him in a parking lot of apool hall at night. What sort of person deals like that?
Someone that is selling something that is has something wrong with it .

Needless to say the mill is inoperable and needs attention. Most of wires connecting the stepper motors are broken , as if the mill was moved around alot. Nonethe less, these motors are internally wired and can't be repaired.

The cost to make this mill functional is $500 3 new steppers and a driver unit with it's own power supply.
this user CAMARGORED tell me that he's taking a loss to sell this to me for what he did.
That wasn't the story when he pushed this thing on me in a pool hall parking lot, nor was it an issue when
after the deal that he was going to see if he could get another one, so he could sell it to the exclusive shaft maker in texas. OB cues I think it was

 

[camargored]

Well here we go .I didnt force any thing on you. Were you at gun point NO.I told you i could met you in Lex at the pool room and you were fine with that. The only thing i could do with this mill was plug it up (at home) and the motor would run.I said when i bought it, it worked and it did .It was around 5pm when you looked at the mill it wasnt dark ? It was after 9 when we loaded it into your car and i got paid.You seemed very happy to get a 5or 6 thousand dollor cnc mill for $400 and didnt seemed worried about spending a lil $ on if you had to.My post said what you see is what you get and i told you as much about it as i could .Im not going to try to sell something on AZ that i know dosent work and say it does .Then have to see all the negative shit on here about me.You told me you werent working right now and you would have to check with your girlfriend to see how much $ you could spend.Seems your having second thoughts about the $ is the problem.If you didnt think you were getting what YOU wanted you should have not bought the mill simple as that.I told you what i could you looked at it made a offer i countered and you said OK ill go to the ATM ,YOU did!!!! You also said if it didnt work for you ,you would sell it on EBAY ? So dont bash me for your actions ! Camargored

 

[camargored]

A few other things

Ive been with AZ for a while now ive sold a few things and bought a few .The stuff i sold i was honest and have had no problems.Ive bought a few things and traded and have had a few problems .I bought a cue the pin came loose and a shaft i got was warped but i didnt bash the people on the forums .Because i got what i thought was a deal and in the long run it worked out for me .The pin got fixed the cue got sold and the shaft was sold for cheap with a wooble for a break cue . I made the choice to buy these things and i lived with it and it worked out for me .If i get a game and i think i can win and i lose i made the choice to take the game i live with it .SHOTMAKER you made the choice to buy the mill as seen and you can spend a lil to make a nice machine to do inlay work with .You now more about cnc than i do .If this was not what you thought it was you shouldnt have bought it.Im an honest person and dont try to cheat people dont try to make me out to be the bad guy here .You got this for cheap and now your not happy .Because you fill you didnt get the bargain?? Oh and if i could get another one i would .I would look it over and see it run if i could and buy it for what i thought was a deal for me .I would get in touch with the shaft maker (ob1) and see if we could work a deal that worked for both of us and be as honest as possible .What else can you do but be honest?
CAMARGORED

 

[billiardbum]

Yeah I bought this mill. It appears that it may have not run for quites sometime. This guy had me meet him in a parking lot of apool hall at night. What sort of person deals like that?
Someone that is selling something that is has something wrong with it .

Needless to say the mill is inoperable and needs attention. Most of wires connecting the stepper motors are broken , as if the mill was moved around alot. Nonethe less, these motors are internally wired and can't be repaired.

The cost to make this mill functional is $500 3 new steppers and a driver unit with it's own power supply.
this user CAMARGORED tell me that he's taking a loss to sell this to me for what he did.
That wasn't the story when he pushed this thing on me in a pool hall parking lot, nor was it an issue when
after the deal that he was going to see if he could get another one, so he could sell it to the exclusive shaft maker in texas. OB cues I think it was

I have a maxnc controller, and 3 steppers for sale if you want it PM me. If not I might be interested in the machine... Jim

 

[shotmaker]

Ive been with AZ for a while now ive sold a few things and bought a few .The stuff i sold i was honest and have had no problems.Ive bought a few things and traded and have had a few problems .I bought a cue the pin came loose and a shaft i got was warped but i didnt bash the people on the forums .Because i got what i thought was a deal and in the long run it worked out for me .The pin got fixed the cue got sold and the shaft was sold for cheap with a wooble for a break cue . I made the choice to buy these things and i lived with it and it worked out for me .If i get a game and i think i can win and i lose i made the choice to take the game i live with it .SHOTMAKER you made the choice to buy the mill as seen and you can spend a lil to make a nice machine to do inlay work with .You now more about cnc than i do .If this was not what you thought it was you shouldnt have bought it.Im an honest person and dont try to cheat people dont try to make me out to be the bad guy here .You got this for cheap and now your not happy .Because you fill you didnt get the bargain?? Oh and if i could get another one i would .I would look it over and see it run if i could and buy it for what i thought was a deal for me .I would get in touch with the shaft maker (ob1) and see if we could work a deal that worked for both of us and be as honest as possible .What else can you do but be honest?
CAMARGORED

Please let me apoligize. I didn't really mean to bash you. Just a misunderstanding on both of our parts. I can live with it. You're right. It can be sold for what i have in it, or i can fix it.

i know i don't need any enemy's nor do you. So let's just say this has been resolved. Ok, like i said sorry about all this bull here Ok
thanks
Mark