I have a very nice 4 point with veneer cue I took in on trade recently. The cue was butt only when I got it and I made the shaft for it. The cue is in great condition with the only issue being a small lift in the finish at the bottom of one point (see pic). Laser straight together and apart. The shaft is old school stiff solid hitting wood, does have a sugar mark down by joint (see pic). The wrap looks close to new wht with blk spec linen. No markings on the cue butt looks to be a nice build. Birdseye front and flame maple butt, ebony points with 4 veneers.
The cue is very slim in the butt for those that enjoy that smaller feel in the handle.
Pay Pal ONLY.........................450 Shipped UPS in the US shipped in ABS tube for protection SOLD Cuefeene
Any questions please PM me
Specs
Butt 28 3/4"
Shaft 29"
Total 57 3/4"
Butt 15.3oz can go lower
Shaft 3.9oz
Total 19.3oz
Joint 3/8-10 modified brass pin
Joint dia .822
Butt dia 1.183
Balance point 17 3/4 from bottom of butt cap
Shaft 12.57mm everest tip
The cue is very slim in the butt for those that enjoy that smaller feel in the handle.
Pay Pal ONLY.........................450 Shipped UPS in the US shipped in ABS tube for protection SOLD Cuefeene
Any questions please PM me
Specs
Butt 28 3/4"
Shaft 29"
Total 57 3/4"
Butt 15.3oz can go lower
Shaft 3.9oz
Total 19.3oz
Joint 3/8-10 modified brass pin
Joint dia .822
Butt dia 1.183
Balance point 17 3/4 from bottom of butt cap
Shaft 12.57mm everest tip
Last edited: