Advice on new cue

The best way to find a cue that plays like your Power Piston 3 is to keep playing with your old cue. If it needs repaired, refinished, or retipped, a competent repairman would bring it back to near new condition.

If you want to play with something different, you’ll have to figure that out for yourself by experimenting with other cues that are for sale. When trying new-to-you cues, remember that tip hardness will affect your opinion of the hit.

I never heard a woman complain about a shaft being too stiff. They complain about everything else, but not that.
The best way to find a cue that plays like your Power Piston 3 is to keep playing with your old cue. (y) (y) (y)

OP said:
I’d really like to explore some other options, but after nearly 30 years of playing with the same cue, nothing else I’ve tried has felt quite right.
What have you tried?
Not that popular opinion should dictate what I shoot with, but I’m open to trying something different.
Again: What have you tried?
When you try, how long to you try? What do you do? Take a few straight shots? Play a few racks?

Years back a bought a Schon with birdseye maple and ebony. I was used to the classic Meucci grip so gripping a different textured material felt foreign to me so I sold it.
Yes, it will feel different. That shouldn't have anything to do with how it plays, it's a matter of getting used to a tactile sensation. Plus, you can have a cue wrap any way you like, including having a finish over the wrap.

How long did you play with it?
 
As far as im concerned the whippy shafts was the best by far and ive been trying to replicate it since.

I have a Ted Harris that everytime I went to the shop I had him move the taper back another few inches, imagine my surprise when I bought one of Earls cues he had done the exact same thing(all the way back to within probably 5 inches or less from the joint). Great minds
 
. If you order an in stock one from an online retailer with a good return policy your risk would be pretty low. I

Little risk at PoolDawg
1795316358039.png
__
1795316576445.png
 
As far as im concerned the whippy shafts was the best by far and ive been trying to replicate it since.

I have a Ted Harris that everytime I went to the shop I had him move the taper back another few inches, imagine my surprise when I bought one of Earls cues he had done the exact same thing(all the way back to within probably 5 inches or less from the joint). Great minds

The new Meucci shafts are whippy enough while not feeling like noodles.

They also have a nice sound from a well struck cue ball.
 
Ultimately, I’m looking for recommendations from anyone who’s familiar with the original Power Piston 3 and can suggest a modern cue with a similar feel, flex, and playing characteristics.
Well you asked for advice, so here's my 2 cents worth.

What someone on here is going to tell you about their feel is not going to translate to your feel.

Forget the cue you have played for 30 years give or take. Spend a good amount of money(if you can) on a new playing cue with 2 shafts, a break cue and a jump cue. I would suggest Cuetec. Cynergy carbon fiber shafts, Breach break cue & Propel jump cue.

Use the cues & only those cues - make them an extension of your shooting arm.

I for one am not going looking for the equivalent of a Great Big Bertha driver with a RCH 36 graphite shaft, Big Bertha Warbird fairway wood with a 7.7 Rifle shaft, Lynx Parallax irons 2-PW & Cleveland 54° & 60° wedges.

Live in the now!!
 
Well you asked for advice, so here's my 2 cents worth.

What someone on here is going to tell you about their feel is not going to translate to your feel.

Forget the cue you have played for 30 years give or take. Spend a good amount of money(if you can) on a new playing cue with 2 shafts, a break cue and a jump cue. I would suggest Cuetec. Cynergy carbon fiber shafts, Breach break cue & Propel jump cue.

Use the cues & only those cues - make them an extension of your shooting arm.

I for one am not going looking for the equivalent of a Great Big Bertha driver with a RCH 36 graphite shaft, Big Bertha Warbird fairway wood with a 7.7 Rifle shaft, Lynx Parallax irons 2-PW & Cleveland 54° & 60° wedges.

Live in the now!!
I don’t take jump shots unless im playing a pick-up game at the gym. I tried a Cuetec back in 2004, didn’t care for it. I have a brand new set of Cleveland Tour Actions with a Cleveland Hibore XL driver and I go golfing once a year 😉….Im that guy.

​

 
I don’t take jump shots unless im playing a pick-up game at the gym. I tried a Cuetec back in 2004, didn’t care for it. I have a brand new set of Cleveland Tour Actions with a Cleveland Hibore XL driver and I go golfing once a year 😉….Im that guy.

​

The Cuetecs now are not the Cuetecs then. For the money, the AVID shaft is tough to beat.
 
The best way to find a cue that plays like your Power Piston 3 is to keep playing with your old cue. (y) (y) (y)

OP said:

What have you tried?

Again: What have you tried?
When you try, how long to you try? What do you do? Take a few straight shots? Play a few racks?

Yes, it will feel different. That shouldn't have anything to do with how it plays, it's a matter of getting used to a tactile sensation. Plus, you can have a cue wrap any way you like, including having a finish over the wrap.

How long did you play with it?

I have tried Meucci, Schon, Joss, Mcdermott, Predator, Cuetec and im sure a few others I have forgotten. Most of those cues I played with were from other players at hard times or shooters out here in California.
 
My family owns a wrecking yard, and back in 1998, a guy came into the yard looking to buy a rear end for a Ford Bronco. During our conversation, he mentioned that he owned a billiard store and invited me to stop by and check out what he had.

At that point in my life, I had only played pool a handful of times, but I decided to take him up on his offer. Long story short, I ended up trading him the rear end he needed for a Meucci Power Piston 3.

That cue is essentially what I learned to play pool with, and I’ve been shooting with it ever since. Over the years, I’ve tried several other cues, but they all seem to feel stiff in comparison. There’s just something about the way my Meucci plays that I haven’t been able to find in anything else.

I’m curious if there’s anything on the market today that offers a comparable feel and plays similarly to the original Power Piston 3. I’d really like to explore some other options, but after nearly 30 years of playing with the same cue, nothing else I’ve tried has felt quite right.

I’m also aware that Meucci cues, particularly the Power Piston line, don’t necessarily have the best reputation among much of the billiards community. Not that popular opinion should dictate what I shoot with, but I’m open to trying something different.

Ultimately, I’m looking for recommendations from anyone who’s familiar with the original Power Piston 3 and can suggest a modern cue with a similar feel, flex, and playing characteristics.
You're going to have trouble finding a cue now that has the flex your old Meucci did.
I'd suggest having a shaft made, 30", 1" ferrule, thin pro taper, say 12.2 or 12.5, soft tip and hope you get close to the same shaft flex you had with your old cue.
 
I have tried Meucci, Schon, Joss, Mcdermott, Predator, Cuetec and im sure a few others I have forgotten. Most of those cues I played with were from other players at hard times or shooters out here in California.
Sounds like a good selection.

I really think it takes time though.

I think this is even more true when one has a long relationship with a cue. Speaking as someone with more than 40 years with his first cue, I have experience with that.

Even after I started collecting, it was many years before I really considered any other cue a player. It was a Huebler H-14 that broke that ice for me.

Now I have many players. None truly replaces my Joss, but I am totally comfortable with them.

For a guy in your situation I recommend spending some real playing time with another cue. By all means gather people's thoughts. Then find an ice breaker.

I wish you luck in your search and hope you can enjoy the adventure.
 
Well, if it ain't broke, why fix it?...but, if you must, if I were you, you've been playing long enough to deserve a nice custom made cue, from a reputable maker...;)
 
If you are in the LA area, maybe talk to Martin Bick from Superiorcues. He sells very good cues and knows a lot about it.
I bought my Ed Prewitt from him and play with it ever since. Recently, I bought an original Prewitt CF shaft. It took quite some time to adjust to it, but now I am very happy with it.
I also grew up with my old Meucci Gambler, then changed to the Red Dot Shaft and later to the Predator 314 shaft. The Meucci was nice to put a good ammount of English to the CB. But with a nice, soft tip and the CF shaft, I traded a bit of English against more precision (I think).
But as Chopdoc wrote - it takes some time to adjust. However, IMHO, it's worth the time.

Regards from Germany

Gerhard
 
Back
Top