Any one want cues with G-10

[Alaskin Assasin]

Hello,





My name is Bryan Fisher and I'm one half of Fisher cues. My brother and I have been making cues for about 3 years now. We have cue's avalible with G-10 pins. Right now we have them ranging from $350-$450. Pointed and inlayed cues due out in the early spring of '06. Why pay $2000 for a plain jain when you can have it for a fraction of the price. We are also working on a number of wrapless cues, and wrapless one peice butt cues. We specialize in G-10 pin, Radial pin, and Southwest style pins. But will build to customers liking.

We've been blessed with very good word of mouth. One of which is non other than Shane Van Boening from South Dakota. He is the 04, and 05 Vnea Masters 8-ball champion.

I met Shane on a few occasions in Souix Falls SD, at Breaktime billiards. Shane and I played in the Finals of of one of the tournaments. Not that I'm at his level but I do out break Shane but it wasn't enough to seal the deal, Shane double dipped me in the finals. any way At the 04 vnea championships Shane was playing great, I mean super, but his break wasn't making it easy for him. After witnessing his come back win over Gabe Owen some where around the final 8 or so, I went to Shane and asked him if he'd like to try my break cue, he did and fell in love with it, he made balls at will. Any way his break is no longer lagging behind.

We've been making a very good break/jump cue called the Master Blaster. Sells for $250 for our standard, also we build custom B/J's as well.

Thank you for your time reading my post. If there is interest in our cues or would like a quote on a custom cue our email is fishercues@hotmail.com
if you would like to talk with me over the phone email me with your number, and I'll give you a call at my earliest convenience.

If there is high interest in our cues I will post our current inventory w/pics and full discriptions.

Our moto is: Playability, Customability, and Affordiblility


Thank you

Bryan Fisher
Fisher Cues

fishercues@hotmail.com

 

[Poolshootindon]

Show me

Hello,





My name is Bryan Fisher and I'm one half of Fisher cues. My brother and I have been making cues for about 3 years now. We have cue's avalible with G-10 pins. Right now we have them ranging from $350-$450. Pointed and inlayed cues due out in the early spring of '06. Why pay $2000 for a plain jain when you can have it for a fraction of the price. We are also working on a number of wrapless cues, and wrapless one peice butt cues. We specialize in G-10 pin, Radial pin, and Southwest style pins. But will build to customers liking.

We've been blessed with very good word of mouth. One of which is non other than Shane Van Boening from South Dakota. He is the 04, and 05 Vnea Masters 8-ball champion.

I met Shane on a few occasions in Souix Falls SD, at Breaktime billiards. Shane and I played in the Finals of of one of the tournaments. Not that I'm at his level but I do out break Shane but it wasn't enough to seal the deal, Shane double dipped me in the finals. any way At the 04 vnea championships Shane was playing great, I mean super, but his break wasn't making it easy for him. After witnessing his come back win over Gabe Owen some where around the final 8 or so, I went to Shane and asked him if he'd like to try my break cue, he did and fell in love with it, he made balls at will. Any way his break is no longer lagging behind.

We've been making a very good break/jump cue called the Master Blaster. Sells for $250 for our standard, also we build custom B/J's as well.

Thank you for your time reading my post. If there is interest in our cues or would like a quote on a custom cue our email is fishercues@hotmail.com
if you would like to talk with me over the phone email me with your number, and I'll give you a call at my earliest convenience.

If there is high interest in our cues I will post our current inventory w/pics and full discriptions.

Our moto is: Playability, Customability, and Affordiblility


Thank you

Bryan Fisher
Fisher Cues

fishercues@hotmail.com

Lets see what you have..Don

 

[Zims Rack]

Don,
Post a link to your website or show some photos of your work. Also, check out http://www.azbilliards.com/vbulletin/upload/showthread.php?t=19772
Since you're from the Mid West, you could benefit from the Gateway Amateur 9-Ball Tour.

Thanks,
Zim

 

[matthew staton]

Hello,





My name is Bryan Fisher and I'm one half of Fisher cues. My brother and I have been making cues for about 3 years now. We have cue's avalible with G-10 pins. Right now we have them ranging from $350-$450. Pointed and inlayed cues due out in the early spring of '06. Why pay $2000 for a plain jain when you can have it for a fraction of the price. We are also working on a number of wrapless cues, and wrapless one peice butt cues. We specialize in G-10 pin, Radial pin, and Southwest style pins. But will build to customers liking.

We've been blessed with very good word of mouth. One of which is non other than Shane Van Boening from South Dakota. He is the 04, and 05 Vnea Masters 8-ball champion.

I met Shane on a few occasions in Souix Falls SD, at Breaktime billiards. Shane and I played in the Finals of of one of the tournaments. Not that I'm at his level but I do out break Shane but it wasn't enough to seal the deal, Shane double dipped me in the finals. any way At the 04 vnea championships Shane was playing great, I mean super, but his break wasn't making it easy for him. After witnessing his come back win over Gabe Owen some where around the final 8 or so, I went to Shane and asked him if he'd like to try my break cue, he did and fell in love with it, he made balls at will. Any way his break is no longer lagging behind.

We've been making a very good break/jump cue called the Master Blaster. Sells for $250 for our standard, also we build custom B/J's as well.

Thank you for your time reading my post. If there is interest in our cues or would like a quote on a custom cue our email is fishercues@hotmail.com
if you would like to talk with me over the phone email me with your number, and I'll give you a call at my earliest convenience.

If there is high interest in our cues I will post our current inventory w/pics and full discriptions.

Our moto is: Playability, Customability, and Affordiblility


Thank you

Bryan Fisher
Fisher Cues

fishercues@hotmail.com

How about some pictures of your jump/break cues I never heard of your cues so a picture would help a lot thanks.

 

[Alaskin Assasin]

Ebony & Bocote Dash Rings

I will post some pics of our cues. some are done and ready to ship, some are 2-3 weeks from being done. Some need final finishing and buffing and some just need the shaft final sanded and tip/ferrules installed.

 

[Koop]

I will post some pics of our cues. some are done and ready to ship, some are 2-3 weeks from being done. Some need final finishing and buffing and some just need the shaft final sanded and tip/ferrules installed.

That is a beautiful piece of bocote.

May I offer a bit of constructive criticism? The initials on the buttcap are a bit of a turn-off for me. Otherwise that is a very nice looking cue.

Kind regards,
Koop

 

[Alaskin Assasin]

Ebony & Bocote


Ebony w/dash rings (buska).

Weight: 20 oz
Balance: Forward
Shaft: 13mm Maple
Ferrule: MP Ivory (multipolimer)
Tip: Water Buffalo
Joint Pin: G-10
Joint/Butt cap: MP Ivory
Wrap: Black w/white spec.

Can change Weight heavier, lighter I'm afraid of hurting the integrity of the cue.

Can Change tip to Moori for $20, or Talisman for $15.

Price for Ebony dash= $450

Price For Bocote dash= $400

I accept Money order, and Paypal. Will take personnal check but, wait for it to clear. I will package and ship for free in lower 48 states.

 

[Alaskin Assasin]

Thank you, Koop

I'm always open to positive critisim. We will be CNC ing our name in, in the future. Didn't have time for these cues.

Thankyou,

Bryan Fisher
Fisher Cues

 

[Koop]

Thank you, Koop

I'm always open to positive critisim. We will be CNC ing our name in, in the future. Didn't have time for these cues.

Thankyou,

Bryan Fisher
Fisher Cues

Glad you took it the way it was intended. Great work so far.

Koop

 

[Alaskin Assasin]

Rosewood & Cocobolo dash rings

Rosewood dash is 1 1/2 longer

Both of these cues were custom built for a player who first wanted dash rings at all the regular place, like the two previous dash ring cues. Then he desided he didn't want them so flashy?????? So he wanted both rings above and below the wrap to be covered up, so we put the wrap over the rings as he requested and behold when he came to check the cues out before finishing he saw two other cues we were building and wanted them instead. So all in all thats why there aren't rings above and below the wrap.

All specs on cues are about the same as others.

Rosewood
18oz
59.5 inchs long
white and black spec wrap

Cocobolo
19.5 oz
black and white spec wrap

Price: $375 Either one

 

[Alaskin Assasin]

Pudak, Cocobolo, Ebony. Silver Rings

Pudak, Cocobolo, and Ebony forearm and buttsleeve with Silver ring work through out.

Pudak cue. I have 2 of these cues avalible, but only the one shown is finished and wrapped.


Specs are the same as others


Pudak
18.5 oz
Black and Red spec wrap

Cocobolo cue
This cue is wrappless it has a (in my humble opinion) beutifull piece of Half and half birdseye. Which means that one side is clear birdseye with beutiful eyes, and the other is dark heartwood with beutiful eyes. Originaly this cue was to be wrapped but I just couldn't allow it. this cue is ready for final finishing.

19 oz
half and half birdseye for a wrap


Ebony

I have two of these cues as well, but only the one shown is finished and wrapped.

19.5
Gabon ebony
black and white spec wrap


Pudak cue: $350

Cocobolo No wrap: $375

Ebony: $400

 

[Alaskin Assasin]

Birdseye, Purpleheart, Bacote W/rings

Birdseye, Purpleheart, and Bacote forearm and buttsleeve with silver rings


Birdseye
18.25oz
White and black spec wrap


Purpleheart
19oz
White and black spec wrap

Bacote
19.5oz
Black and white spec wrap


Prices: $350 each

 

[Alaskin Assasin]

2 cocobolo cues w/ silver rings

Both feature cocobolo forearm and buttsleeve with silver rings


Coco #1

58.5 inchs long
19.25oz
White and brown spec wrap


Coco#2

Cue has a chacter flaw in one of the knots in the wood. it shows up as a white dot. Could be filled in but I'm going to leave this one alone, call me lazy, but this past weekend at a tournament I had a guy notice this on another cue of ours that had a Tiger Forearm and butt sleeve and a cocobolo handle. There was an obvious white dot in the handle. He saw it and brought about 4 of his buddies over to look at it. He bought it on the spot and began to rave about how that one flaw was the reason he thought the cue was so beutiful. So I'll go with it on this one although I'm sure I'm about to get some flack from someone.

19 oz
Black and white spec wrap



Price: $350 Each

 

[Alaskin Assasin]

Tiger Cue w/ cherry maple dash rings

This is a cue we started on before our G-10 pins were done.

Cue has nothing but awsome tiger(curly) maple. I like to call it Flaming maple, because I got most of my tiger maple from a guitar maker that was going out of buisness.

Flaming forearm, Flaming Handle, Flaming Buttsleeve W/ black and cherry maple dash rings through out.

60in. long 30inX30in
19oz
Flat laminated shaft
Mp ivory ferrule
Meduim Moori
5/16-18 joint

Price: $425

 

[Alaskin Assasin]

Standard Master Blaster Break/Jump Cues

These are our standard Master Break/Jump cues.

Maple forearm, some may have light bird or curly character.

Buttsleeve or no buttsleeve. It's up to you.

Cue features:

1in Master Blaster Tip/Ferrule combo (phenolic)
13.25 mm shaft
3/8-10 joint pin
Uni-loc quick release aluminum jump stud
Solid black wrap.
17oz-19.5oz can make heavier or lighter. same price may not be avalible for immediate delivery.

Our inventory has been depleated from this past weekend. but still have some avalible.

Price: $250 Because of the low price I do charge $10 shipping and handling unless multiple cues are purchased

 

[Alaskin Assasin]

Bacote/Tiger Wrappless Set

Here is a set of no wrap Bacote/tiger cues to be sold together. We started on these cues 21/2 to 3 years ago before we got wise to not use delarin. But instead of scrapping the cues we've decided to try to finish this cue extra well. Cue is in the final finishing and buffing stages.

Playing cue Features:

Bacote Forearm/buttsleeve
Tiger Handle
Rings: Brass, White Delarin, Black Delarin Reapeated through out
59in long
G-10 pin
Mp ivory ferrule
Tip: Your Choice
13mm Shaft
19.75 oz

Custom Master Blaster B/J

Tiger Forearm/buttsleeve
Bacote Handle
Rings: Brass, and black delarin
G-10 pin
1in Master blaster tip/ferrule combo (phenolic)
13.25mm


Price: $775

 

[Michael Webb]

Hello,
Why pay $2000 for a plain jain when you can have it for a fraction of the price.

fishercues@hotmail.com

First off Welcome,
Second, You could have done without the above line.
If someone pays $2000.00 for a plain Jane, Their not buying the cue, their buying the name. Sell your cues based on your love for the craft, the pride you put in your quality and the playability of the cue itself.
Good Luck
Your cues look great.

 

[Alaskin Assasin]

Ebony W/rings sold

The finished ebony cue with silver rings is sold, Got an unfinished one left.

Bryan Fisher
Fisher Cues

Pudak, Cocobolo, and Ebony forearm and buttsleeve with Silver ring work through out.

Pudak cue. I have 2 of these cues avalible, but only the one shown is finished and wrapped.


Specs are the same as others


Pudak
18.5 oz
Black and Red spec wrap

Cocobolo cue
This cue is wrappless it has a (in my humble opinion) beutifull piece of Half and half birdseye. Which means that one side is clear birdseye with beutiful eyes, and the other is dark heartwood with beutiful eyes. Originaly this cue was to be wrapped but I just couldn't allow it. this cue is ready for final finishing.

19 oz
half and half birdseye for a wrap


Ebony

I have two of these cues as well, but only the one shown is finished and wrapped.

19.5
Gabon ebony
black and white spec wrap


Pudak cue: $350

Cocobolo No wrap: $375

Ebony: $400

 

[Alaskin Assasin]

Here is a set of no wrap Bacote/tiger cues to be sold together. We started on these cues 21/2 to 3 years ago before we got wise to not use delarin. But instead of scrapping the cues we've decided to try to finish this cue extra well. Cue is in the final finishing and buffing stages.

Playing cue Features:

Bacote Forearm/buttsleeve
Tiger Handle
Rings: Brass, White Delarin, Black Delarin Reapeated through out
59in long
G-10 pin
Mp ivory ferrule
Tip: Your Choice
13mm Shaft
19.75 oz

Custom Master Blaster B/J

Tiger Forearm/buttsleeve
Bacote Handle
Rings: Brass, and black delarin
G-10 pin
1in Master blaster tip/ferrule combo (phenolic)
13.25mm



Price: $775

This Set of Cues has been sold.

Bryan Fisher
Fisher Cues

 

[Alaskin Assasin]

Does the G-10 pin work very well in a J/B cue? Never saw one before.
Just curious.

Hello,


G-10 Transfers energy better than steel, or aluminum. A good wood to wood joint will transfer alot of energy compared to 5/16-14 or18, or any metal inserted cue. Not saying they don't hit well, or break well. Just I beleave in the wood to wood joint. Also G-10 is an ounce or more lighter than steel pins, Making the jump cue of the jump break cue lighter. It may all be what one person to the next likes.

Thanks,

Bryan Fisher
Fisher Cues