Centennial pedestal problem

[gsm1sw]

I sent these out to be refinished. but in the process of doing so the person refinishing became ill and could not complete the job. I retrieved the parts but did not notice that the pedestals were missing some wood until I tried to reattach the aluminum. As you can see there is a 1" gap between the aluminum and the top of the wood.

Does anyone have any pictures of the pedestal bottom without the aluminum on it so I can make the necessary repairs?

Thanks.

 

[scruffy1]

See if these will help. you are really only missing the main pedestal and the 2 foot pads.If you need exact dimensions, feel free to call.

John

 

[gsm1sw]

These should work. thanks

 

[Steve Dickey]

Here are some pads.

http://www.classicbilliards.net/html/AntiquePoolTablePartsProducts.cfm?img=apd_ft.jpg&item=APD/FT&price=$17.50&Shipping=$12.00&Desc=Anniversary leg bottom poplar wood Pads

I give up, check under Anniv/Cent Parts.

 

[ROB.M]

Table

Here are some pads.

http://www.classicbilliards.net/html/AntiquePoolTablePartsProducts.cfm?img=apd_ft.jpg&item=APD/FT&price=$17.50&Shipping=$12.00&Desc=Anniversary leg bottom poplar wood Pads

I give up, check under Anniv/Cent Parts.

-
I hate it when that happens, that link does the same thing to be...








Rob.M