Clear coat options

J

JonW

New member
I hate to dredge this conversation back up, but I've been doing quite a bit of reading the last few days from previous threads regarding clear coat options and it seems like everyone leans toward the mindset of "this is what I use and I'd never consider anything else". Not a dig by any means, but as someone who is wanting to get away from the CA glue and paper towel method of applying clear coat to a cue, I am having some difficulty deciding what direction to start heading.

I don't currently have the ability or space to set up a full auto-clear/2k spray booth, so unfortunately that option is pretty much off my table.

The product that I lean most towards is solarez. I've seen some back and forth regarding that product, but the photos and videos I've seen using the product seem to make a fantastic result.

I've also contemplated brite tone, but from what I gather, it isn't the most resilient and also can be damaged with alcohol, which makes it seem like a less-than-desirable option.

I've also read that there may be some secret sauce for using CA that provides more consistent results? I'd be interested in hearing those out as well. I'm currently using starbond medium, sometimes with accelerator and sometimes without. My results so far have been passable, but not exactly something I step back and say "wow" about.

I guess I'm mostly looking for a "you should try this, it's worth it" in any specific direction. UV seems to be super doable with less setup, but I'd like to make sure I'm not getting the cart ahead of the horse. (even better if anyone wants to take the time to provide a link or two with a "do this first, then this, then you're done")

Thanks everyone, I enjoy reading the discussions in the forums and I've learned a lot so far.
 
Jerry Powers has a newer kind of UV finish that looks promising. The recommended UV light to cure is around $500 but, if you compare that to the price of a spray booth, it isn't a bad option.

I've used every type of finish over the past 30 years. Each one has its pros and cons. I still go back to auto clear. It is hard to beat the clarity and sheen.
 
I'm certainly not as experienced as many on here, but I've done quite a few CA finishes, and you need to wipe with oil between CA coats. I did not like using starbond or any accelerator, loctite worked the best for me. Two to three coats, sand flat, finish coat, then finish sanding.

With that said, I really don't like using the CA finish due to health risks, even through its the most durable IMO. Auto clear is the best all around, but slightly less durable with just as good of clarity is an oil based urethane. I've been trialing one common wood working product lately and I've been very pleased with the results so far. It's surprising how far some of these products have come in the recent years.
 
ratcues said:
Jerry Powers has a newer kind of UV finish that looks promising. The recommended UV light to cure is around $500 but, if you compare that to the price of a spray booth, it isn't a bad option.

I've used every type of finish over the past 30 years. Each one has its pros and cons. I still go back to auto clear. It is hard to beat the clarity and sheen.
Click to expand...
Its a really good and easy finish to apply, pain the butt to get a nice shine. Way to much for lights. I bought a 2 pack of UV light bars for $20 on amazon that do the job.
 
ratcues said:
Jerry Powers has a newer kind of UV finish that looks promising. The recommended UV light to cure is around $500 but, if you compare that to the price of a spray booth, it isn't a bad option.

I've used every type of finish over the past 30 years. Each one has its pros and cons. I still go back to auto clear. It is hard to beat the clarity and sheen.
Click to expand...
That’s interesting, I assume one would need to call him to get it? I didn’t see any products on his website
 
Ģüśţāṿ said:
I'm certainly not as experienced as many on here, but I've done quite a few CA finishes, and you need to wipe with oil between CA coats. I did not like using starbond or any accelerator, loctite worked the best for me. Two to three coats, sand flat, finish coat, then finish sanding.

With that said, I really don't like using the CA finish due to health risks, even through its the most durable IMO. Auto clear is the best all around, but slightly less durable with just as good of clarity is an oil based urethane. I've been trialing one common wood working product lately and I've been very pleased with the results so far. It's surprising how far some of these products have come in the recent years.
Click to expand...
Only 4 coats or so? What thickness CA glue were you using? Also what type of oil do you recommend between coats?

CA more durable than auto clear? I may need to step my game up on CA maybe, mine has chipped in a couple places when I bumped it into a table before…
 
You must log in or register to reply here.
Back
Top