Purchased new from Chris in the summer of 2020. I've messed around with it and converted a few bar cues but never had the time to dedicate to building cues and now I'm moving and need it gone. I've made a few mods to it listed here - Mods list.
All mods listed in the link above are included except the auto reversing setup/bracket.
I also have a separate thread about the indexing mod listed here - Indexing mod Pic of mod at bottom of post.
$2200
Located in Kuna, ID
Won't ship but willing to drive a few hours to meet someone halfway.
Tools included (not all shown):
Standard drive pins - 3/8 x 10, 5/16 x 18, and 5/16 x 14
Taps - 3/8 x 10 and 5/16 x 14
Tenon cutter for ferrules - 5/16 x 18
.65" Gun Drill with air valve - only used a few times
Live Center Large 1″ diameter 60º Degree (3/8 shank)
Live Center Large Concave 3/8 shank
Dial indicator with bent needle (dropped it
)
1/16" slot cutter, used for final shaft finish - used maybe once or twice for testing
Miscellaneous collets and box of random stuff - pic below
Does not include the router but the router mount is included
It includes two regular tool post (from Cuesmith) but no quick change tool posts; however, I purchased some QCTP parts for my old metal lathe which will be included.
There are also some old cutting tools, boring bars (one of the QCTP parts is a boring bar holder)
I will also include a 30" shaft blank and an old Dove cue butt that needs work.
Box of MISC stuff. 3/8 x 10 pins (3 aluminum and 1 SS), 3/8 x 10 JP pins, 5/16 x 18 JP pins, a couple of 5/16 x 18 brass inserts, random rings that I purchased from someone years ago, 5/16 x 14 pin with brass insert, 3/8 x 10 aluminum connecting pins, a few tips, miscellaneous black rings, etc. Just a box of random stuff I've collected.
All switches/dials relocated to one easy to reach bracket.
Adjustable limit switches.
Adjustable dial indicator - reaches all points along the lathe easily.
Separate relay/outlet panel included - plugs into back of lathe and the wall, when it hits the added limit switches it shuts everything down.
Indexing mod so there is ZERO play when indexing stuff:
All mods listed in the link above are included except the auto reversing setup/bracket.
I also have a separate thread about the indexing mod listed here - Indexing mod Pic of mod at bottom of post.
$2200
Located in Kuna, ID
Won't ship but willing to drive a few hours to meet someone halfway.
Tools included (not all shown):
Standard drive pins - 3/8 x 10, 5/16 x 18, and 5/16 x 14
Taps - 3/8 x 10 and 5/16 x 14
Tenon cutter for ferrules - 5/16 x 18
.65" Gun Drill with air valve - only used a few times
Live Center Large 1″ diameter 60º Degree (3/8 shank)
Live Center Large Concave 3/8 shank
Dial indicator with bent needle (dropped it
)1/16" slot cutter, used for final shaft finish - used maybe once or twice for testing
Miscellaneous collets and box of random stuff - pic below
Does not include the router but the router mount is included
It includes two regular tool post (from Cuesmith) but no quick change tool posts; however, I purchased some QCTP parts for my old metal lathe which will be included.
There are also some old cutting tools, boring bars (one of the QCTP parts is a boring bar holder)
I will also include a 30" shaft blank and an old Dove cue butt that needs work.
Box of MISC stuff. 3/8 x 10 pins (3 aluminum and 1 SS), 3/8 x 10 JP pins, 5/16 x 18 JP pins, a couple of 5/16 x 18 brass inserts, random rings that I purchased from someone years ago, 5/16 x 14 pin with brass insert, 3/8 x 10 aluminum connecting pins, a few tips, miscellaneous black rings, etc. Just a box of random stuff I've collected.
All switches/dials relocated to one easy to reach bracket.
Adjustable limit switches.
Adjustable dial indicator - reaches all points along the lathe easily.
Separate relay/outlet panel included - plugs into back of lathe and the wall, when it hits the added limit switches it shuts everything down.
Indexing mod so there is ZERO play when indexing stuff: