Ferrule Stain Removal

G

GADawg

AzB Silver Member
Silver Member
I have just jad a new tip put onto a used cue and something has caused part of the ferrule to become stained blue, like from chalk.

The stain does not wipe off or wash off with soapy water.

Any ideas on how I might remove it without damaging the ferrule or tip?
 
Blud always mentioned using PEARL DROPS toothpaste. I personally use any abrasive tooth whitener commercially available.
 
GADawg said:
I have just jad a new tip put onto a used cue and something has caused part of the ferrule to become stained blue, like from chalk.

The stain does not wipe off or wash off with soapy water.

Any ideas on how I might remove it without damaging the ferrule or tip?
Click to expand...

You've got a double-post going.

Anyway, it seems fairly obvious to me that this isn't a stain issue but a glue issue. It's glue. Glue on top of stain. You can't clean the stain with Magic Eraser, Pearl Drops, or any of those things if glues is on top of the stain.

At this point, the glue will be just a fine layer on top of the stain. You may need to sand it away. Don't try to use a razor blade. You will trim your ferrule and you'll be onto more trouble. Or ask the guy who put the tip on to take care of it.

Fred
 
You might try a product called "Oops" from your local hardware store. It is designed to remove paint and glues from unwanted places. I would not let it touch the shaft so apply it to a cloth or paper towel and be very careful. Read the directions carefully first.
 
Last edited:
Watch out for Oops, I believe its mineral spirits and will eat away some finishes such as poly clear coats used in wood working however I think they're safe on regular paint like cars. Just be careful and read the directions if you use it.
 
Cornerman said:
You've got a double-post going.

Fred
Click to expand...

I know the double post is there but I have no idea how it happened. I only did it one time, and was stone cold sober at the time.

You may be right about the glue over the stain.

It looks "runny" where the stain is, so I suspect the glue ran, picking up the chalk with it. I'll try a light sanding to remove the glue and then if the stain persists, will try the tootpaste or other mild abrasive.

I am afraid to use any type of solvent on the ferrule without knowing exactly what the chemical results might be.
 
Next time you engage in tip replacement, the first thing to do prior to removing the old tip is to cover the ferrule using a 'plastic tape' made by 3M. It comes in several colors and is available at hardware stores.
 
Might I suggest next time have the tip put on by a pro. My guy cleans both the shaft and the ferrule along with installing the tip and it still only costs $20 for a regular tip like lepro or $40 for a Morri.
 
rackem said:
Might I suggest next time have the tip put on by a pro. My guy cleans both the shaft and the ferrule along with installing the tip and it still only costs $20 for a regular tip like lepro or $40 for a Morri.
Click to expand...

That's the way I always did it for people at he pool room, but I always asked first before doing anything to the shaft. You should never get a cue back from a professional with any kind of stains from the tip install. At least the ferrule should have been cleaned.

Gerry
 
polish

kokopuffs said:
Blud always mentioned using PEARL DROPS toothpaste. I personally use any abrasive tooth whitener commercially available.
Click to expand...
right on kokopuffs, PEARL DROPS, works for me.
blud
 
Blue Glue

Sounds like the problem you have is what I call "Blue Glue".

If the ferrule is not cleaned before installing the tip, there is a good chance that the chalk residue left on the ferrule will mix with the glue and you have a small problem.

Easy solution is to just make sure the ferrule is clean before doing the tip.
If the old tip is still on the cue, it best to clean the ferrule before removing the old tip so as to avoid rounding the end of the ferrule you will be attaching the tip to.

Finally, the solution to your problem may lie in a little wet sanding with pearl drops if the paste won't do it alone.
 
You must log in or register to reply here.
Back
Top