MT3 Live center with interchangeable parts - used one time - $30
2 - Contactor 2 Pole, 30FLA, 24VAC - never used - $5 each
Taig Parts 100-17,100-20,100-22,100-23,100-24,100-28 - never used - $10
Taig tool holders #1170 - needs screw & nut from hardware store - $3 each
Taig dual tool holders - needs screw & nut from hardware store - $5 each
Taig 1/2" live center #1151 - some corrosion - $10
Enco 2" Boring Head with MT3 shank (fits with 1/2 inch live center to make a nice offset, if your lathe is long enough) - slight corrosion - $75
Enco Feet - never used - $10 for both
4" .25" dia piece of carbide with 2 triangular carbide inserts - never used - $8
Enc spin indexer - never used - $40
5C 7/8" Collet - never used - $5
2 - 5C 1" Collet - never used - $5 each
5C 1 1/8" Collet - never used - $5
Phase II MT2 to MT 3 adapter - never used - $3
Chuck Key .306 square - never used - $5
HF 6" Digital Calipers - sleeve in pic is wrong - never used - $15
8 - 1" x 12" Delrin dowels for making your own collets - $4 each
Shut off switch - control your 220V lathe, router, dust collector and something else all with a normal wall switch. I used magnets to position the metal switch housing and a metal bracket to the carriage to trip the switch. Worked great but I sold the lathe. - If you haven't built one of these, You'll spend about that much in parts, plus your time. - $40, otherwise, I'll split off just the contactor box for $30.
If you need/want better pics, just let me know. You buy a few things, I'll cover shipping.
2 - Contactor 2 Pole, 30FLA, 24VAC - never used - $5 each
Taig Parts 100-17,100-20,100-22,100-23,100-24,100-28 - never used - $10
Taig tool holders #1170 - needs screw & nut from hardware store - $3 each
Taig dual tool holders - needs screw & nut from hardware store - $5 each
Taig 1/2" live center #1151 - some corrosion - $10
Enco 2" Boring Head with MT3 shank (fits with 1/2 inch live center to make a nice offset, if your lathe is long enough) - slight corrosion - $75
Enco Feet - never used - $10 for both
4" .25" dia piece of carbide with 2 triangular carbide inserts - never used - $8
Enc spin indexer - never used - $40
5C 7/8" Collet - never used - $5
2 - 5C 1" Collet - never used - $5 each
5C 1 1/8" Collet - never used - $5
Phase II MT2 to MT 3 adapter - never used - $3
Chuck Key .306 square - never used - $5
HF 6" Digital Calipers - sleeve in pic is wrong - never used - $15
8 - 1" x 12" Delrin dowels for making your own collets - $4 each
Shut off switch - control your 220V lathe, router, dust collector and something else all with a normal wall switch. I used magnets to position the metal switch housing and a metal bracket to the carriage to trip the switch. Worked great but I sold the lathe. - If you haven't built one of these, You'll spend about that much in parts, plus your time. - $40, otherwise, I'll split off just the contactor box for $30.
If you need/want better pics, just let me know. You buy a few things, I'll cover shipping.
Attachments
Last edited:
