I have the following for sale. I am going to offer them to AZB until Saturday evening. If no takers, they will go to Ebay.
1. 4 point very fancy Frey sneaky, Bacote w/black irish linen wrap, black rings at joint, triple rings of white/black/white above and below wrap, white phenolic butt cap, "F" between points, 2 shafts, both 29" (#1-3.7oz, 12.6mm, #2-3.7oz, 12.7mm), butt weighs 15.7oz, 3/8x10 stainless joint (.820), butt is just over 28 1/2" making the entire cue just over 57 1/2"...58" to end of rubber bumper. Nice and straight.
Now on Ebay...good luck..
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7220471044&rd=1&sspagename=STRK:MESE:IT&rd=1
2. Frey 4 pt sneaky, darker wood, either cocobolo or rosewood with the much desired white butt cap with trademark "F". Finish is in excellent condition. A light cue weighing 17oz (can be adjusted by replacing weight bolt), 58", 1 shaft (13mm tip), 3/8x10 wood to wood joint (.810). Cue has one spot in the wood but under the finish, so you can't feel it...does not affect cue. Plays great. Nice and straight.
SOLD!! Thanks!!
3. A matched set of Tim Scruggs shafts for a fancy sneaky pete. One is dead straight, the other has the very slightest (and I emphasize SLIGHT) roll-out. One weighs 4.1 oz, the other weighs 3.9oz. Both are right at 12.6 mm at ferrule. Both have black rings at joint which is .840". One shaft has Aegis ferrule, the other has Ivory-x ferrule.
SOLD!! Thanks!!
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
1. 4 point very fancy Frey sneaky, Bacote w/black irish linen wrap, black rings at joint, triple rings of white/black/white above and below wrap, white phenolic butt cap, "F" between points, 2 shafts, both 29" (#1-3.7oz, 12.6mm, #2-3.7oz, 12.7mm), butt weighs 15.7oz, 3/8x10 stainless joint (.820), butt is just over 28 1/2" making the entire cue just over 57 1/2"...58" to end of rubber bumper. Nice and straight.
Now on Ebay...good luck..
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7220471044&rd=1&sspagename=STRK:MESE:IT&rd=1
2. Frey 4 pt sneaky, darker wood, either cocobolo or rosewood with the much desired white butt cap with trademark "F". Finish is in excellent condition. A light cue weighing 17oz (can be adjusted by replacing weight bolt), 58", 1 shaft (13mm tip), 3/8x10 wood to wood joint (.810). Cue has one spot in the wood but under the finish, so you can't feel it...does not affect cue. Plays great. Nice and straight.
SOLD!! Thanks!!
3. A matched set of Tim Scruggs shafts for a fancy sneaky pete. One is dead straight, the other has the very slightest (and I emphasize SLIGHT) roll-out. One weighs 4.1 oz, the other weighs 3.9oz. Both are right at 12.6 mm at ferrule. Both have black rings at joint which is .840". One shaft has Aegis ferrule, the other has Ivory-x ferrule.
SOLD!! Thanks!!
Last edited:
