Price Reduced to SOLD
This here is a very nice RAT Custom Cue. It has a African Blackwood forarm and butt sleeve with a Cocobolo handle and rings. I had him leave off his standard rings at the joint so any standard LD shaft will match. This cue plays absolutely great; this was my main playing cue for about a year so it does show a few signs of wear but I think you can see them in the pictures so there won't be any surprises if you purchase the cue. The finish has no chips but does have some minor scuffs. The ferrule on the longer tapered shaft has some wear rings from a improperly used tip tool but this is very minor. I would say the hit is Medium-Hard, with the longer taper shaft hitting just a little softer. Everything roles straight together and apart.
Specs:
Butt Weight: 15oz
Butt Diameter (1 inch from the end): 1.24" (31.5mm)
Pin: 5/16-14
Balance Point: 19 1/8" (NOT including the bumper)
Shaft Diameters at the Joint: 0.840"
Shaft 1:
Shaft Weight: 4oz
Shaft Taper: Ryan's standard taper... 14.5" I think
Tip Diameter: 13mm
Shaft 2:
Shaft Weight: 3.8oz
Shaft Taper: 16"
Tip Diameter: 12.85mm
Tips: Everest
If you have any questions please ask.
Thanks,
Michael
This here is a very nice RAT Custom Cue. It has a African Blackwood forarm and butt sleeve with a Cocobolo handle and rings. I had him leave off his standard rings at the joint so any standard LD shaft will match. This cue plays absolutely great; this was my main playing cue for about a year so it does show a few signs of wear but I think you can see them in the pictures so there won't be any surprises if you purchase the cue. The finish has no chips but does have some minor scuffs. The ferrule on the longer tapered shaft has some wear rings from a improperly used tip tool but this is very minor. I would say the hit is Medium-Hard, with the longer taper shaft hitting just a little softer. Everything roles straight together and apart.
Specs:
Butt Weight: 15oz
Butt Diameter (1 inch from the end): 1.24" (31.5mm)
Pin: 5/16-14
Balance Point: 19 1/8" (NOT including the bumper)
Shaft Diameters at the Joint: 0.840"
Shaft 1:
Shaft Weight: 4oz
Shaft Taper: Ryan's standard taper... 14.5" I think
Tip Diameter: 13mm
Shaft 2:
Shaft Weight: 3.8oz
Shaft Taper: 16"
Tip Diameter: 12.85mm
Tips: Everest
If you have any questions please ask.
Thanks,
Michael
Last edited:
