FS: Ebony inlay slabs

bdcues

bdcues

AzB Silver Member
Silver Member
FS: Have 19 Ebony slabs for inlays. They are all about .180 thick. These vary in length and width but as you can see from the pictures the 5 on the left are wide and long, over 28". 5 of the smaller ones on the right have iridescent curl to them. The 5 on the left have some lighter areas but still good black color, the flash washes out a little of the color. The 14 on the right are all pretty much BLACK. I have marked out the boards for defects, live edge, etc and computed the total square inches at 1018.71". Total usable inches will be higher. Asking $300.00 including shipping in lower 48 states. Paypal OK. Wish to sell as one group, if you want to share with someone else I will ship to one location and you can reship from there.
Alright, got them changed and attached. Note that the large pieces on left have between 107 and 139 square inches of usable material each. Standard 1.5" x 9" slabs have 13.5 square inches. The smallest one on the right side has over 19 square inches.

Bob Danielson
www.bdcuesandcomix.com
 

Attachments

  • ebony1.jpg
    ebony1.jpg
    6.8 KB · Views: 475
  • ebony2.jpg
    ebony2.jpg
    6.9 KB · Views: 471
  • ebony3.jpg
    ebony3.jpg
    6.1 KB · Views: 470
  • ebony4.jpg
    ebony4.jpg
    6.9 KB · Views: 468
Last edited:
I've bought 3 batches of wood from Bob. Very impressed. If I hadn't had just gotten some ebony from him this would be gone. Flat, smooth, consistant width, and very black. He also cut some down to .125 for me that is perfect for billets.
 
OK, no one wants 1000 inches of inlay so I will part these out. Long wide boards on left are numbers 1 - 5, on right 6 - 19 but don't know if they are all in order in the picture so will just list each number, size, cost. These are all figured at .27cents per square inch. Price does not include shipping. This ebony is minimum 9 years old since being imported, dry and ready to use.
1. 137.50 sq in = $37.12 Black with some brown streaking
2. 118.00 sq in = $31.86 '' " SOLD
3. 107.00 sq in = $28.89 " " SOLD
4. 115.15 sq in = $30.09 " " SOLD
5. 139.20 sq in = $38.93 " "
6. 32.00 sq in = $8.64 Jet Black SOLD
7. 23.12 sq in = $6.24 Jet Black with interlocked curl figure SOLD
8. 23.12 sq in = $6.24 " " SOLD
9. 23.75 sq in = $6.41 " " SOLD
10. 19.37 sq in = $5.22 " "
11. 33.25 sq in = $8.97 Jet Black SOLD
12. 41.80 sq in = $11.28 " SOLD
13. 51.00 sq in = $13.77 " SOLD
14. 20.00 sq in = $5.40 " SOLD
15. 27.00 sq in = $7.29 " SOLD
16. 35.43 sq in = $9.56 " SOLD
17. 23.4 sq in = $6.31 Jet Black with interlocked curl figure SOLD
18. 32.37 sq in = $8.73 Jet Black SOLD
19. 35.62 sq in = $9.61 " SOLD
If interested please email to order@bdcuesandcomix.com as the mailbox here fills up fast.
Thanks, Bob Danielson
bdcuesandcomix.com
 
Last edited:
3 slabs left, #1, #5 and #10.
If someone is interested in more of the jet black inlay material I can cut probably another 1000 square inches of the stuff. Send me an email if interested.


Bob Danielson
www.bdcuesandcomix.com
 
You must log in or register to reply here.
Back
Top