FS/FT: 2006 (converted) wrapless Coker

hardknox222

AzB Silver Member
Silver Member
I have an 2006 Tom Coker wrapless cue for sale or trade. It originally had black linen in the handle but I had it converted into a wrapless handle and the guys at Viattorre did an excellent job with it. They removed the linen and painted the maple handle black and then slowly filled it in with urethane finish. See before and after pictures below.

Cue specs:


Built: April 2006
Forearm, buttsleeve and butt cap is highly figured bocote
Ringwork: Silver rings at locations A,B,C,D & E
3/8x10 stainless steel pin with bocote joint collar and wood to wood contact
Butt Weight: 14.7oz Butt Length: 29 inches
Shaft #1: 12.85mm Sumo tip, 29.25 inches long, 4.1oz with 1 inch phenolic ferrule
Shaft #2: 13.2mm Sumo tip, 29.25 inches long, 4.1oz with 1 inch phenolic ferrule
Balance point (from end of butt cap): 20 inches on both shafts


The cue came with a weight bolt but I removed it when I got the cue. I will include the weight bolt when I ship the cue if the buyer is interested.

This cue is used but in excellent condition. Both shafts have been played but no more than 20 hours of use. The shafts hit stiff and very dense at 4.1oz each. There are very minor dings on both shaft and some scratches from normal usage. Both shafts roll straight and no taper rolls. Butt and shafts roll straight together and apart. No dents on the butt except for a small nick in the joint collar (see pic below). I am the first owner and I bought this cue brand new in May 2006.

Please send me a PM if interested or reply to this thread. Thank you.

Full cue
Picture165.jpg


Butt Sleeve & Butt Cap
Picture166.jpg


Handle (BEFORE) w/ black linen wrap
orig_with_linen_wrap.jpg


Handle (AFTER) converted into wrapless
Picture168.jpg


Forearm
Picture169.jpg


Joint pin
Picture171.jpg


Coker Sig
Picture170.jpg


Small nick at the joint collar
Picture173.jpg
 
Last edited:
caromkidd42 said:
you're pics don't seem to be working. I'm interested in checking out this cue.


Pictures are working here and its a very nice looking cue . Caromkidd42 try shutting off your firewall .
 
Last edited:
Hi all. I am attaching the images for those who cannot view pics from photobucket. The images are a little bit smaller because of the file size limitation but hopefully, it will give you an idea how the cue looks. Thanks.
 

Attachments

  • full_cue.jpg
    full_cue.jpg
    62.2 KB · Views: 93
  • handle_b4_w_linen_wrap.jpg
    handle_b4_w_linen_wrap.jpg
    52.1 KB · Views: 94
  • handle_after_wrapless.jpg
    handle_after_wrapless.jpg
    30.8 KB · Views: 88
  • forearm.jpg
    forearm.jpg
    38.5 KB · Views: 78
  • joint_pin.jpg
    joint_pin.jpg
    48.4 KB · Views: 73
here's more pics...

... and here's the rest of the pics.
 

Attachments

  • coker_sig.jpg
    coker_sig.jpg
    58.6 KB · Views: 74
  • small_nick_at_joint_collar.jpg
    small_nick_at_joint_collar.jpg
    61.4 KB · Views: 77
  • buttsleeve_buttcap.jpg
    buttsleeve_buttcap.jpg
    50.7 KB · Views: 75
i can see them....
cool idea and seems to have come out awesome!!!
tose shafts look real dense man!!
Good luck with the sale- Coker's hit nice.... someone will get a great cue....
 
Thanks for the compliments. This really is a nice playing cue and it hits very well too. Like I said the shafts are dense 4.1oz and hit stiff. I also like the wood joint collar which is not very common.

All pms have been replied too. If you have anything to trade, please PM me.

Thanks again.
 
Back
Top