cueporn
Banned
I have a bunch of 1.5 inch wide 8020 square stock channel with 4 Tslots , one per side. Can be used for steady rest extensions, mounting taper bars and framing. Here are the lengths I have.
10 sections 27 1/8" long. They have a 1.5" long 5/16 16 threaded portion on each end. $10 each
13 sections 36 3/7" long, with 5/18 holes drilled at each end from the side. $13 each.
4 sections over 5 feet, 1 is 61 3/4" the other 3 are 60 1/2". $20 each.
I also have 48 panel mounting blocks ,part # 15s-2425, for mounting panels to 8020. They also can be used to make stops and mounts on Taig beds. They are 7/8 high, 1.25 long and 1 inch wide. They allow a 1/4 inch panel to be mounted flush with the 8020 or on top of it using a 5/16 16 screw through the threaded hole. These sell for $6.25, I will sell them for $1.50 each, incluing the Tnut for mounting.
I have several 24 inch long sections of Taig Uchannel, which the Taig bed is mounted on. These I could sell for $10 each. Can be used with Taig mill part for mounting headstocks 200-48, costs $6, or taig bed sections to build repair lathe beds, steady rests or longer sections of lathe bed joined end to end.
Orders over $40, no charge for shipping in the continental US.
10 sections 27 1/8" long. They have a 1.5" long 5/16 16 threaded portion on each end. $10 each
13 sections 36 3/7" long, with 5/18 holes drilled at each end from the side. $13 each.
4 sections over 5 feet, 1 is 61 3/4" the other 3 are 60 1/2". $20 each.
I also have 48 panel mounting blocks ,part # 15s-2425, for mounting panels to 8020. They also can be used to make stops and mounts on Taig beds. They are 7/8 high, 1.25 long and 1 inch wide. They allow a 1/4 inch panel to be mounted flush with the 8020 or on top of it using a 5/16 16 screw through the threaded hole. These sell for $6.25, I will sell them for $1.50 each, incluing the Tnut for mounting.
I have several 24 inch long sections of Taig Uchannel, which the Taig bed is mounted on. These I could sell for $10 each. Can be used with Taig mill part for mounting headstocks 200-48, costs $6, or taig bed sections to build repair lathe beds, steady rests or longer sections of lathe bed joined end to end.
Orders over $40, no charge for shipping in the continental US.