Hello,
Time to do a little bit of a spring clean up, so here is the list:
Hydrocote Gloss Resisthane Plus, Quart (it is full used it once about a month ago and it is my favorite water based finished to spray. Levels out incredibly well and is hard. - SOLD! plus shipping
Ceramithane Gloss, Quart (very good water based finish and good to use with a foam brush. It is full and used it once and it is about 1 month old as well) - SOLD! plus shipping
Compounds:
Wizards TurboCut (awesome compound to use after wetsanding just make sure you shake the crap out of it before using it) : SOLD! plus shipping
Wizards ShineMaster (give it that shinny gloss after using your final compounds): SOLD! plus shipping
3M Perfect-It II Foam Polishing Pad Glaze, Dark, 16 oz Bottle - (Produces a deep, rich, swirl free finish - used it a bit, about 90% full) -SOLD! plus shipping
Ridgid Hold Down Push/Blocks (brand new in box they cost around $40.00, 2 push blocks per box) - $20.00 per box set plus shipping
Husky HVLP and Conventional Spray Gun Kit (The Husky HVLP and Conventional Spray Gun Kit includes 2 gravity feed spray guns specially designed for use on light- and medium-thickness materials. The HDS590 is a HVLP-type gun, and the HDS580 is a conventional sprayer. Both guns are designed to spray enamels, lacquers, polyurethane, primers and urethane top coats, including both base coats and clear coats. Both guns also have a gravity feed design optimized for use in painting automobiles, furniture and other equipment, and designed to promote atomization.) - used it twice and bought it for over $80.00 at Home Depot.
SOLD!
Drills:
1 - HSS 7.8mm for shafts (before tapping) - SOLD!
2 - 5/16 3/8 end mill 1" long cut depth - SOLD!
3 - 5/16 solid carbide drill w/2.5" cut depth: SOLD!
4 - 5/16 solid carbide drill w/3 1/4" cut depth: SOLD!
5 - 3/8 solid carbide drill w/4" cut depth: SOLD!
6 - 3/8 solid carbide drill w/3" cut depth: SOLD!
If anybody wants to buy it all feel free to call me at 209-482-7768 or pm me.
Time to do a little bit of a spring clean up, so here is the list:
Hydrocote Gloss Resisthane Plus, Quart (it is full used it once about a month ago and it is my favorite water based finished to spray. Levels out incredibly well and is hard. - SOLD! plus shipping
Ceramithane Gloss, Quart (very good water based finish and good to use with a foam brush. It is full and used it once and it is about 1 month old as well) - SOLD! plus shipping
Compounds:
Wizards TurboCut (awesome compound to use after wetsanding just make sure you shake the crap out of it before using it) : SOLD! plus shipping
Wizards ShineMaster (give it that shinny gloss after using your final compounds): SOLD! plus shipping
3M Perfect-It II Foam Polishing Pad Glaze, Dark, 16 oz Bottle - (Produces a deep, rich, swirl free finish - used it a bit, about 90% full) -SOLD! plus shipping

Ridgid Hold Down Push/Blocks (brand new in box they cost around $40.00, 2 push blocks per box) - $20.00 per box set plus shipping

Husky HVLP and Conventional Spray Gun Kit (The Husky HVLP and Conventional Spray Gun Kit includes 2 gravity feed spray guns specially designed for use on light- and medium-thickness materials. The HDS590 is a HVLP-type gun, and the HDS580 is a conventional sprayer. Both guns are designed to spray enamels, lacquers, polyurethane, primers and urethane top coats, including both base coats and clear coats. Both guns also have a gravity feed design optimized for use in painting automobiles, furniture and other equipment, and designed to promote atomization.) - used it twice and bought it for over $80.00 at Home Depot.
SOLD!


Drills:
1 - HSS 7.8mm for shafts (before tapping) - SOLD!
2 - 5/16 3/8 end mill 1" long cut depth - SOLD!
3 - 5/16 solid carbide drill w/2.5" cut depth: SOLD!
4 - 5/16 solid carbide drill w/3 1/4" cut depth: SOLD!
5 - 3/8 solid carbide drill w/4" cut depth: SOLD!
6 - 3/8 solid carbide drill w/3" cut depth: SOLD!

If anybody wants to buy it all feel free to call me at 209-482-7768 or pm me.
Last edited: