Help - ballstar polisher instructions

[The_Mole]

I just picked up a ballstar ball polisher with no instruction.

Can anyone help me find instruction online I have looked for days.

or

Can anyone tell me how to remove the paddles so I can replace the cloth disk.

I know it will be easy I just don't want to pull at it and break it if I'm doing it wrong.

This is the first ball cleaner I have used and I am very impressed by how well it works.

 

[JimS]

I just picked up a ballstar ball polisher with no instruction.

Can anyone help me find instruction online I have looked for days.

or

Can anyone tell me how to remove the paddles so I can replace the cloth disk.

I know it will be easy I just don't want to pull at it and break it if I'm doing it wrong.

This is the first ball cleaner I have used and I am very impressed by how well it works.

I just got a used one a while back.

I had to pull much harder than I was comfortable doing but it came off. It fights very tightly but with sufficient wiggleing and pulling the paddles came off and the pad became reachable. The pad that came on mine isn't badly worn so I left it for a while and it cleans the balls beautifully.

I'm not using the Ballstar polish that came with mine. I just spray some Brillianize (HIGHLY recommended!) on the balls and start the cycle at the beginning. It works great! While I had the paddles off the machine I cleaned them up with a Magic Eraser and a Xenit...a citrus based cleaner from Stoner Solutions that cleans anything and everything.

In my anal zeal I wanted to remove and clean the rubber bumps around he edges but they appear to permanently affixed... i.e., no way to remove them.

The instructions don't amount to much but if you pm me your mailing address I'll copy mine and mail them to you. My scanner won't work.

 

[The_Mole]

Thanks for that I thought I was going to pull the motor out ;-)

My email address is mole247@yahoo.co.uk.

Thanks and I will look into the polish u suggested.

 

[JimS]

Thanks for that I thought I was going to pull the motor out ;-)

My email address is mole247@yahoo.co.uk.

Thanks and I will look into the polish u suggested.

I felt the same way. The guy that sold me mine even thought to send a "FYI" pm to me before I ever tried it... he anticipated that I'd have a problem with that. I never would have pulled that hard if he'd not have sent me that pm telling me it WILL come off but has to be pulled off.