I need 18 tables moved and recovered in florida

B-Rod

B-Rod

Always Post First!!!
Silver Member
So were moving the poolhall about 7 miles we have 9 valley bar tables 1 diamond smart bar table 2 9ft diamond pro ams 1piece slate 5 gold crown IV's 3piece slates and a 12ft duffren snooker table. We want all the lights hung and u or I provide the felt either way the plugs are already there for the lights. Let me know the tables are in pensacola Florida and are being moved seven miles
 
it would be helpful to designate which cloth you want on all the tables and what type of lights your hanging. In addition what time frame do you need this done in. Your local mech's have a big advantage in performing this job since it wouldn't require travel expenses etc. Are both rooms ground floor? do any tables need new cushions or rail modifications?
 
OTLB said:
it would be helpful to designate which cloth you want on all the tables and what type of lights your hanging. In addition what time frame do you need this done in. Your local mech's have a big advantage in performing this job since it wouldn't require travel expenses etc. Are both rooms ground floor? do any tables need new cushions or rail modifications?
Click to expand...

I can't find a local guy ours moved. The lights are standard lights hung by chains simple installation and cloth will be either simonis or velocity. They are both ground floor you can pull up to the front door
 
I might even come give you a hand john. I'm going to be working in the south and southeast for a while.
 
I met Wes last year and we talked some( a good all around guy IMO), you should give him a call as he is closer and better suited to provide ongoing service.
 
How do you like that gold crown 5 I hear there nice and I saw you sell tips do you install them too and how much
Sorry the guy deleted the post above me
Sent from my Galaxy Nexus using Tapatalk
 
Last edited:
Billiard Fitter

Just want to throw in a comment quick. I recently played down at Strokers for US Amatuer event. Room being done by Billiard Fitter.. The cloth was on tight and tables seemed to play alright. Pocket work was disgusting, with a weird pull on every side pocket in the room. Most rails were puckered as well. Who knows how this reflects the work over a span, but those pockets really stuck out to me. I can see why you might wanna avoid the locals, but if you get Shane and John down there you will be very pleased!

Rob
Www.tabletek.net
 
TableTek said:
Just want to throw in a comment quick. I recently played down at Strokers for US Amatuer event. Room being done by Billiard Fitter.. The cloth was on tight and tables seemed to play alright. Pocket work was disgusting, with a weird pull on every side pocket in the room. Most rails were puckered as well. Who knows how this reflects the work over a span, but those pockets really stuck out to me. I can see why you might wanna avoid the locals, but if you get Shane and John down there you will be very pleased!

Rob
Www.tabletek.net
Click to expand...

Thanks for the positive reply
 
You must log in or register to reply here.
Back
Top