1. Cue - Judd JT-1 ( Judd Fuller )
2. Pin & Joint Type - 3/8x10 flat faced
3. Weight - 19.5 oz
4. Balance Point - 19 inches from the bumper
5. Butt Length Minus Pin - 29 3/4
6. # of Shafts - 3 shafts ( 2 original maple shafts and 1 mated and matched OB-2 shaft )
7. Shaft Length/s minus tip - Both maple shafts measure out to 29 3/4 minus the tip and the ob-2 measures 1/16 inder 29 3/4
8. Tip Type - Maple shafts have pressed Elkmasters and the OB-2 shaft has a Wizard medium
9. Ferrule Type/s, Diameter/s & Length/s - Both maple shafts have elforyn ferrules, shaft without any chipping in the collar edge measures
out to be 10.63mm at the tip of ferrule and 12.00mm 10 inches down the shaft. The 2nd maple shaft measures at 10.88mm at the tip of the
ferrule and 11.70mm 10 inches down the shaft. The OB-2 shaft has the standard ob ferrule the tip diameter at teh tip of the ferrule is 11.70mm and 13.20mm 10 inches down the shaft.
10. Ringwork - Locations a,b,c,d,e ( Locations a,b,d,e consist of tan phenolic collars with brass rings, middle section of tan phenolic with 5 thin
veneers ( maple, brown, orange, brown, maple ). Location c consists of a tan phenolic ring with a single brass ring.
11. Inlays - n/a
12. Points - n/a
13. Forearm - Highly figured birdseye maple
14. Handle - Highly amboyna burl
15. Butt - Highly figured birdseye maple
16. Butt Cap - Tan phenolic
17. Additional Info - This cue was custom made for me back in 2007 and completed in 2008. It is the standard JT-1 model that Judd makes with the exception of brass rings instead of silver rings. The OB-2 shaft doesnt match exactly due to Judd using different shades of tan. This was not an acident as stated by Judd. He further stated that he ran out of the original tan that he used and what was sent to him didn't match his old stock. He went on to explain that in the process of making the linene phenolic that a couple flaws with linen phenolic is its dirt spots and inconsistent shade from reel to reel. There are also a couple chips in the finish on the edges of one of the maple shafts and in the OB-2 shaft.
Asking Price - SOLD
Note that if the following cue contains ANY ivory, I will not ship outside USA. Not even to Canada.
Shipping will be free to all US residents. Cues bought by over seas customers additional 50.00 US to cover
shipping rates and coverage for full insurance on item.
Payment - I accept US Postal Money Orders or Paypal from verified paypal users ( So whatever address is on the paypal
account, that's where Im shipping your item to. Please do not ask me to ship to an alternate address because I will not
do this. )
2. Pin & Joint Type - 3/8x10 flat faced
3. Weight - 19.5 oz
4. Balance Point - 19 inches from the bumper
5. Butt Length Minus Pin - 29 3/4
6. # of Shafts - 3 shafts ( 2 original maple shafts and 1 mated and matched OB-2 shaft )
7. Shaft Length/s minus tip - Both maple shafts measure out to 29 3/4 minus the tip and the ob-2 measures 1/16 inder 29 3/4
8. Tip Type - Maple shafts have pressed Elkmasters and the OB-2 shaft has a Wizard medium
9. Ferrule Type/s, Diameter/s & Length/s - Both maple shafts have elforyn ferrules, shaft without any chipping in the collar edge measures
out to be 10.63mm at the tip of ferrule and 12.00mm 10 inches down the shaft. The 2nd maple shaft measures at 10.88mm at the tip of the
ferrule and 11.70mm 10 inches down the shaft. The OB-2 shaft has the standard ob ferrule the tip diameter at teh tip of the ferrule is 11.70mm and 13.20mm 10 inches down the shaft.
10. Ringwork - Locations a,b,c,d,e ( Locations a,b,d,e consist of tan phenolic collars with brass rings, middle section of tan phenolic with 5 thin
veneers ( maple, brown, orange, brown, maple ). Location c consists of a tan phenolic ring with a single brass ring.
11. Inlays - n/a
12. Points - n/a
13. Forearm - Highly figured birdseye maple
14. Handle - Highly amboyna burl
15. Butt - Highly figured birdseye maple
16. Butt Cap - Tan phenolic
17. Additional Info - This cue was custom made for me back in 2007 and completed in 2008. It is the standard JT-1 model that Judd makes with the exception of brass rings instead of silver rings. The OB-2 shaft doesnt match exactly due to Judd using different shades of tan. This was not an acident as stated by Judd. He further stated that he ran out of the original tan that he used and what was sent to him didn't match his old stock. He went on to explain that in the process of making the linene phenolic that a couple flaws with linen phenolic is its dirt spots and inconsistent shade from reel to reel. There are also a couple chips in the finish on the edges of one of the maple shafts and in the OB-2 shaft.
Asking Price - SOLD
Note that if the following cue contains ANY ivory, I will not ship outside USA. Not even to Canada.
Shipping will be free to all US residents. Cues bought by over seas customers additional 50.00 US to cover
shipping rates and coverage for full insurance on item.
Payment - I accept US Postal Money Orders or Paypal from verified paypal users ( So whatever address is on the paypal
account, that's where Im shipping your item to. Please do not ask me to ship to an alternate address because I will not
do this. )
Last edited:
