Just finished two orders

DBK

DBK

AzB Silver Member
Silver Member
The first - Cocobolo and Hornbeam. Butterflies on the handle. Cocobolo cup. Hornbeam crown-shaft. Short ferrule. Moory M tip. Radial pin.

Complexity of this cue was the necessary to make very forward balance at low weight and thin structure of the cue. The basic balancing loading of the cue is added ahead under the pin.

Weight of 18.9 ounces, 60" length, diameter of the handle near the bamper 29 mm, MooryM tip 12мм.
Covering - oil polishing.
IMGa_0442.jpg
IMGa_0440.jpg
IMGa_0441.jpg
IMGa_0451.jpg
 
The second.

The butterfly cue. Black Rosewood and Figured Maple. Sleeve and back butterflies - the ebony.
Rings - expensive ivory substitute. A pin 3/8-11 G10.

Two shafts. The first - Black Rosewood and Figured Maple butterfly on the joint part and the laminated maple, the second - the laminated maple. Short ferrule. Triangle tips 13 mm. 60 " length. Weight - 20.5 ounces with laminated shaft, natural balance without a weight bolts. Covering - auto clear coats.
IMG_0440a.jpg
IMG_0465.jpg
IMG_0439a.jpg
IMG_0464.jpg
 
Last edited:
Thanks friends. Without your support it would be difficult to work .:wave3:

Love that Rosewood butterfly. Can you post a pic with the shaft screwed on?
Click to expand...
Thanks. I shall try to make picture tomorrow. Now very much late already.

By the way, I forgot, I have finished one more cue simultaneously with these two. One piece full splice, Amaranth, Hornbeam. Triangle tip. Length 18 ", weight... low weight.:)
IMG_0439.jpg
 
You must log in or register to reply here.
Back
Top