Looking for Advice on Veneer damage

[Fast996]

On my Brunswick Alexandria there are 2 side panels that have bubbling it is raised & has tiny splits over a 8 inch square area.

Is there away to fix this without re-veneering? This table has a shellac finish over the wood which is figured walnut.

All the veneer panels are decent except for these blistered ones.

Here is a picture of 1 panel has some crazing the other is musch worse bubbled up and blistered.

[

Thanks in advance.

Gary

 

[Mr. Bond]

Apply steam if you can to soften the wood a bit. Take a razor and make a tiny slice in the bubble or bulge and use a special wood glue syringe to inject glue, and then clamp or stack heavy flat objects ( like bricks) onto the bubble or bulge to flaten it out.

( that's the basic concept. You would obviously adjust it to your needs etc)