I will be posting up complete specs and pics tonight for my buddy. He's a member on this site but I'm more knowledgeable at posting pics on here than he is so he asked me if I could help him out.
1. Cue Make/Model : Mezz ACE 805
Joint Type : Wavy Joint
Butt Weight : 14.55 oz ( No weight bolt )
Wrap Area : Black Linen
Balance Point : 19.5 inches from the bottom of cue
Shaft Type : Mezz ALPHA shaft
Shaft Tip Diameter : 12.75 tip of ferrule 12.80 bottom of ferrule
Shaft weight : 3.6 oz
Tip Type : Tiger Sniper
Shaft Condition : Dead straight, No warp, taper roll is dead even all around
Joint protectors included.
Condition : Excellent. No chips, or cracks etc. Some signs of use such as scuffs
in the butt and a few dings, all of which must be looked at from a few inches away
to spot. I had a hard time trying to capture them being that they were so small.
This cue honestly looks brand spankin new.
Asking 750.00 Shipped, Firm ( US BUYERS ONLY )
2. Mezz Extension with X Bumper
Asking 115.00 Shipped, Firm
3. Cue Make/Model: Falcon OL-8 ( Ontario Line )
Joint Type : Piloted 5/16x14
Butt Weight : 14.75oz ( No weight bolt )
Wrap Area : Black with white spec Irish linen
Balance Point : 20 Inches from Bottom of cue
Shaft Type : Original Standard Maple Shaft
Shaft Tip Diameter : 12.85 tip of ferrule 13.00 bottom ferrule
Shaft weight : 3.85oz
Tip Type : Black Diamond
Shaft Condition : Dead straight, No warp, taper roll is dead even all around
Joint protectors included.
Condition : Excellent. No chips, or cracks just some lifting of the finish in the
ringwork areas
Asking 300.00 Shipped, Firm ( US BUYERS ONLY )
4. Cue Make/Model : Viking V121
Joint Type : Viking Quick release
Butt Weight : 14.9 oz ( No weight Bolt )
Wrap Area : Textured black leather
Balance Point : 20 Inches from bottom of cue
Shaft Type : V Pro ( Note: This is the V Pro before Viking started stamping them
V Pro ).
Shaft Tip Diameter : 11.70 Tip of ferrule 11.80 bottom of ferrule
Shaft weight : 4.2 oz
Tip Type : Pressed Elk Master
Shaft Condition : No warp, but VERY SLIGHT uneven taper roll, not even a credit
card's thickness
Joint protectors included.
Condition : Excellent. No chips, or cracks etc.
Asking 180.00 Shipped, Firm ( US BUYERS ONLY )
Again, I will be updating this post later tonight with all the rest of the specs and of course pictures. PM me with any questions you may have. Thanks again fellas
1. Cue Make/Model : Mezz ACE 805
Joint Type : Wavy Joint
Butt Weight : 14.55 oz ( No weight bolt )
Wrap Area : Black Linen
Balance Point : 19.5 inches from the bottom of cue
Shaft Type : Mezz ALPHA shaft
Shaft Tip Diameter : 12.75 tip of ferrule 12.80 bottom of ferrule
Shaft weight : 3.6 oz
Tip Type : Tiger Sniper
Shaft Condition : Dead straight, No warp, taper roll is dead even all around
Joint protectors included.
Condition : Excellent. No chips, or cracks etc. Some signs of use such as scuffs
in the butt and a few dings, all of which must be looked at from a few inches away
to spot. I had a hard time trying to capture them being that they were so small.
This cue honestly looks brand spankin new.
Asking 750.00 Shipped, Firm ( US BUYERS ONLY )
2. Mezz Extension with X Bumper
Asking 115.00 Shipped, Firm
3. Cue Make/Model: Falcon OL-8 ( Ontario Line )
Joint Type : Piloted 5/16x14
Butt Weight : 14.75oz ( No weight bolt )
Wrap Area : Black with white spec Irish linen
Balance Point : 20 Inches from Bottom of cue
Shaft Type : Original Standard Maple Shaft
Shaft Tip Diameter : 12.85 tip of ferrule 13.00 bottom ferrule
Shaft weight : 3.85oz
Tip Type : Black Diamond
Shaft Condition : Dead straight, No warp, taper roll is dead even all around
Joint protectors included.
Condition : Excellent. No chips, or cracks just some lifting of the finish in the
ringwork areas
Asking 300.00 Shipped, Firm ( US BUYERS ONLY )
4. Cue Make/Model : Viking V121
Joint Type : Viking Quick release
Butt Weight : 14.9 oz ( No weight Bolt )
Wrap Area : Textured black leather
Balance Point : 20 Inches from bottom of cue
Shaft Type : V Pro ( Note: This is the V Pro before Viking started stamping them
V Pro ).
Shaft Tip Diameter : 11.70 Tip of ferrule 11.80 bottom of ferrule
Shaft weight : 4.2 oz
Tip Type : Pressed Elk Master
Shaft Condition : No warp, but VERY SLIGHT uneven taper roll, not even a credit
card's thickness
Joint protectors included.
Condition : Excellent. No chips, or cracks etc.
Asking 180.00 Shipped, Firm ( US BUYERS ONLY )
Again, I will be updating this post later tonight with all the rest of the specs and of course pictures. PM me with any questions you may have. Thanks again fellas
Last edited:
