MEZZ WAVY 2 JOINT

CESSNA10 said:
Does mezz wavy 2 joint accept any other shaft but mezz.
Click to expand...
Yes, some independent and production line cuemakers accommodate this joint (or you can have a cuesmith amend an existing shaft for you) - most after-market shafts will be using the Wavy I fixing, which the Wavy 2 will accommodate. I am not sure if anyone is making them with Wavy 2 specifically, but then I am not a cuesmith, just someone who has experience in buying a couple of shafts for my CP21 :)
 
Flakeandrun said:
Yes, some independent and production line cuemakers accommodate this joint (or you can have a cuesmith amend an existing shaft for you) - most after-market shafts will be using the Wavy I fixing, which the Wavy 2 will accommodate. I am not sure if anyone is making them with Wavy 2 specifically, but then I am not a cuesmith, just someone who has experience in buying a couple of shafts for my CP21 :)
Click to expand...
where do you hear this stuff? its almost impossible to find taps/pins for Wavy1 much less the new Wavy2. BTW, Wavy 2 shafts will fit only Wavy2 pins. Wavy 1 shafts will fit either.
 
Last edited:
garczar said:
where do you hear this stuff? its almost impossible to find taps/pins for Wavy1 much less the new Wavy2.
Click to expand...
Hear? I just lived this :ROFLMAO: - On Xianyu app I can find many CF, Wood and KW shafts fittings Wavy 1 joint (and therefore also Wavy 2). That's what the OP is after right?
I have reduced my Mezz equipment since picking up my Vigas, but still use Mezz for Chinese-8 with an ILC shaft - and have some spare shafts as a 'Just in case' - one is Mezz (wavy 2), one is called 'Fuhjin' made by a Japanese company (Wavy 2), one is handmade (wavy 1), and the other was a Musashi that has been worked on by a cuesmith here to fit (Wavy 1).
All fit my Cp21 and Ace 2180 which are Wavy 2 butts.

garczar said:
BTW, Wavy 2 shafts will fit only Wavy2 pins. Wavy 1 shafts will fit either.
Click to expand...
100% yes to this.
 
Last edited:
Flakeandrun said:
Hear? I just lived this :ROFLMAO: - On Xianyu app I can find many CF, Wood and KW shafts fittings Wavy 1 butt. That's what the OP is after right?
I have reduced my Mezz equipment since picking up my Vigus, but still use it for Chinese-8 with an ILC shaft - and have some spare shafts as a 'Just in case' - one is Mezz, one is called 'Fuhjin' made by a Japanese company, one is handmade, and the other was a Musashi that has been worked on by a cuesmith here to fit.


100% yes to this.
Click to expand...
You must be


in China. The majority on here are in the states and have little-to-no access to a lot of stuff where you live. In the US there aren't that many Wavy shafts around. Rhino, Mezz of course, GoCustoms and maybe a couple others are it.
 
garczar said:
You must be


in China. The majority on here are in the states and have little-to-no access to a lot of stuff where you live. In the US there aren't that many Wavy shafts around. Rhino, Mezz of course, GoCustoms and maybe a couple others are it.
Click to expand...
Yes, I get that continental differences probably apply here (even with regard to the work cuesmith is willing to undertake)
 
garczar said:
where do you hear this stuff? its almost impossible to find taps/pins for Wavy1 much less the new Wavy2. BTW, Wavy 2 shafts will fit only Wavy2 pins. Wavy 1 shafts will fit either.
Click to expand...
It’s my understanding that all new Mezz Exceed cues are all wavy 2 joints. Do you know if that is a fact?
 
Flakeandrun said:
Yes, I get that continental differences probably apply here (even with regard to the work cuesmith is willing to undertake)
Click to expand...
In the US a Wavy1 tap is over 300bux. No cuemaker will buy one. Wavy2 taps/pins are not avail. at all.
 
Quesports said:
It’s my understanding that all new Mezz Exceed cues are all wavy 2 joints. Do you know if that is a fact?
Click to expand...
I believe they are only producing with this joint now (as far as I am aware anyway. I can ask my friend who is specifically a Japanese cue seller here. He'll probably know).

garczar said:
In the US a Wavy1 tap is over 300bux. No cuemaker will buy one. Wavy2 taps are not avail. at all.
Click to expand...
It is still quite pricey here, but not to that extent. I paid the equivalent of 150$ to convert the Musashi. The others were all either traded, or purchased as they were.
 
Flakeandrun said:
I believe they are only producing with this joint now (as far as I am aware anyway. I can ask my friend who is specifically a Japanese cue seller here. He'll probably know).


It is still quite pricey here, but not to that extent. I paid the equivalent of 150$ to convert the Musashi. The others were all either traded, or purchased as they were.
Click to expand...
That is what I thought. What joint did you convert the Musashi cue too?
 
OldOrvis said:
Ive done it hundreds of times with 0 issue :)
Click to expand...
Good luck to you in the long run.



+1 to flakeandrun
Flakeandrun said:
Hear? I just lived this :ROFLMAO: - On Xianyu app I can find many CF, Wood and KW shafts fittings Wavy 1 joint (and therefore also Wavy 2). That's what the OP is after right?
I have reduced my Mezz equipment since picking up my Vigas, but still use Mezz for Chinese-8 with an ILC shaft - and have some spare shafts as a 'Just in case' - one is Mezz (wavy 2), one is called 'Fuhjin' made by a Japanese company (Wavy 2), one is handmade (wavy 1), and the other was a Musashi that has been worked on by a cuesmith here to fit (Wavy 1).
All fit my Cp21 and Ace 2180 which are Wavy 2 butts.


100% yes to this.
Click to expand...
 
garczar said:
where do you hear this stuff? its almost impossible to find taps/pins for Wavy1 much less the new Wavy2. BTW, Wavy 2 shafts will fit only Wavy2 pins. Wavy 1 shafts will fit either.
Click to expand...
Impossible ? Any good cue maker can do it.
 
You must log in or register to reply here.
Back
Top